How to Replace the Front Rack and Pinion Steering Gear on Chevrolet Camaro?

Begin Rack And Pinion replacement by placing drain pan(s) under the vehicle below the Rack And Pinion and pump and then raise and securely support the vehicle. Cutting off the Rack And Pinion's power steering hose inlets and outlets let you lower the vehicle before removing the serpentine belt. Start by taking off the Power Steering Pump pulley after removing the inlet hose fitting from pump along with the outlet hose from the reservoir. A minimum clearance of 12 mm (0.47 inch) needs to exist between all hoses and surrounding parts to stop chafing during installation. It is important to keep both hoses straight while installing and never twist the outlet hose or bend either hose excessively. The process begins with installing the outlet hose to the reservoir before adding the inlet hose fitting to pump. Then attach the Power Steering Pump pulley and serpentine belt. Significantly raise and properly stabilize the vehicle for the next step. After that install Rack And Pinion inlet and outlet hoses (2, 3). Tighten the inlet hose to 28 nm (21 ft. Lbs.) while the outlet hose must reach 28 nm (21 ft. Lbs.). Use the drain pan to lower the vehicle afterward you install the power steering system reservoir and bleed out air pockets.

OEM Chevrolet Camaro Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Rack And Pinions found

View related parts
Chevrolet Camaro Steering Gear
Part Number: 23207196
$1992.37 MSRP: $2781.93
You Save: $789.56 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 23118540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 22930456
$440.29 MSRP: $756.17
You Save: $315.88 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Steering; Gear Assembly; Gear, Steering
- Replaces: 92241184, 20978657, 92233478, 92244725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 84558551
$798.75 MSRP: $1580.79
You Save: $782.04 (50%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly
- Replaced by: 86813347
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 84888218
$2451.01 MSRP: $3150.40
You Save: $699.39 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly
- Replaced by: 86822674
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Camaro | LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 84886555
$1278.55 MSRP: $1641.44
You Save: $362.89 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly
- Replaced by: 86813348
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 84888216
$1456.78 MSRP: $1870.83
You Save: $414.05 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaced by: 86822673
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Camaro | LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 84558550
$1040.42 MSRP: $1437.95
You Save: $397.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaced by: 84886553
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 23494502
$1942.90 MSRP: $2601.93
You Save: $659.03 (26%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 22960699, 22987672, 22848599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Camaro | LS, LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Worm Gear
Part Number: 7817528
Product Specifications
- Other Name: Rack Kit-Piston & Nut Assembly; Steering Rack; Rack & Pinion; Input Shaft; Worm & Ball; Rack Assembly; Steering Gear Kit.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Camaro | Berlinetta, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Gear Assembly
Part Number: 19330435
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Rack and Pinion Assembly; Rack & Pinion; Short Rack; Gear Kit, Steering
- Replaces: 26062311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Gear Assembly
Part Number: 26044843
Product Specifications
- Other Name: Gear Kit, Steering; Short Rack
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1999 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Worm Gear
Part Number: 7817526
Product Specifications
- Other Name: Rack-Piston Nut Kit-Hydraulic Steering Gear; Steering Rack; Rack & Pinion Steering Gear; Input Shaft, Worm & Ball, Worm Shaft, Rack Assembly, Rack Package, Worm Assembly, Piston.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Steering Gear
Part Number: 26087098
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Steering Gear Assembly; Gear, Steering
- Replaces: 7848138, 07848138, 07848140, 7848140, 26033212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992, 1985-1988 Chevrolet Camaro | Base, Berlinetta, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Gear Assembly
Part Number: 26077996
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Short Rack; Gear Kit, Steering
- Replaces: 26060047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Gear Assembly
Part Number: 26044844
Product Specifications
- Other Name: Gear Kit, Steering; Short Rack
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1999 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Rack And Pinion

Our website offers an extensive catalog of genuine Chevrolet Camaro Rack And Pinion at unbeatable prices. Every OEM Chevrolet Camaro Rack And Pinion comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Rack And Pinion Parts Questions & Experts Answers

Gear Assembly
19330435
Q: How to Replace the Front Rack and Pinion Steering Gear on Chevrolet Camaro?
A: Begin Rack And Pinion replacement by placing drain pan(s) under the vehicle below the Rack And Pinion and pump and then raise and securely support the vehicle. Cutting off the Rack And Pinion's power steering hose inlets and outlets let you lower the vehicle before removing the serpentine belt. Start by taking off the Power Steering Pump pulley after removing the inlet hose fitting from pump along with the outlet hose from the reservoir. A minimum clearance of 12 mm (0.47 inch) needs to exist between all hoses and surrounding parts to stop chafing during installation. It is important to keep both hoses straight while installing and never twist the outlet hose or bend either hose excessively. The process begins with installing the outlet hose to the reservoir before adding the inlet hose fitting to pump. Then attach the Power Steering Pump pulley and serpentine belt. Significantly raise and properly stabilize the vehicle for the next step. After that install Rack And Pinion inlet and outlet hoses (2, 3). Tighten the inlet hose to 28 nm (21 ft. Lbs.) while the outlet hose must reach 28 nm (21 ft. Lbs.). Use the drain pan to lower the vehicle afterward you install the power steering system reservoir and bleed out air pockets.