OEM 2001 Chevrolet Corvette Center Console

Floor Console Assembly
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Center Console found

  • 2001 Chevy Corvette Center Console - 12458556
    2001 Chevy Corvette Center Console Diagram - 12458556
    View related parts

    2001 Chevrolet Corvette Lower Cover

    Part Number: 12458556
    $372.25 MSRP: $556.54
    You Save: $184.29 (34%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Console, Floor Console
    • Position: Front
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 26.9 x 23.0 x 8.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12458556
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Chevrolet Corvette Submodels:
    • 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2001 Chevrolet Corvette Center Console

With a comprehensive array of OEM 2001 Chevrolet Corvette Center Console, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Corvette Center Console are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Corvette Center Console Parts Questions & Experts Answers

  • Q: How to replace the Center Console on 2001 Chevrolet Corvette?
    A: To replace the console, one should then remove the folding top stowage compartment lid extension panel (convertible) and open the console door. To release the retaining clips pull up the rear of the electronic traction control, ride control switch; if it doesn't come off, try putting a screwdriver in the recess back of the switch and gently pulling it upwards. Unplug the electrical connector and the LED connector from the wiring harness connector, and remove the switch. Carephully unscrew the console retaining nut cover and the nuts at the rear and front of the console and IP accessory trim plate using a small flat bladed screwdriver. Lift the rear of console a trifle and pull rear to open the front free from under the IP accessory trim plate, then unconnect the electrical connector from electrical accessory plug and unscrew to extract the console electrical accessory plug retainer from console electrical accessory plug housing. Remove the electrical accessory plug housing, disconnect the electrical connector from the fuel door release, then rear lift window release (export), then remove the switch by turning the console over and using a little flat bladed screw driver to release the switch tabs. Lastly, take out the console from the car. For installation, first, you need to install the fuel door release, rear lift window release (export) switch, putting it on the console, aligning, and securing it to the switch, connect the electrical connector to the switch. Mount the electrical accessory plug housing ensuring cover plug plug in position and screw the electrical accessory plug retainer onto housing until secure. Join the electrical connector right to the electrical accessory plug all the time make certain the front of the console is mounted under the rear of the IP accessory trim plate and as the final action join the console retaining nuts. Lay out the console for the best position against the IP accessory trim plate and the floor extension carpet, squeaking the retaining nuts (10 N.m, 89 lb in.)lparr. Connect the electrical connector to the electronic control of traction, ride control switch and the LED connector to the wiring harness connector. Push in the electronic traction control, ride control switch front retaining tab under the edge of the IP accessory trim plate, and position the rear of the switch. Then push it to lock the retaining clips. Close the console door and install folding top stowage compartment lid extension panel(convertible).

Related 2001 Chevrolet Corvette Parts