OEM 2001 Chevrolet Corvette Fan Shroud

2001 Chevrolet Corvette Fan Shroud Parts Questions & Experts Answers

• Q: How to replace the fan shroud on 2001 Chevrolet Corvette?

  A: The replacement of the Fan Shroud requires starting by removing the Radiator support followed by repositioning the inlet hose clamp at the Radiator before disconnection of the inlet hose. After supporting the vehicle at a lifted height you must remove the bolts securing the stabilizer shaft bracket and its accompanying brackets along with insulators. The stabilizer shaft needs to be moved down as you disconnect both fan electrical connectors and detach the forward lamp harness from the retaining clips on the shroud. The outlet hose requires detachment after loosening the hose clamp mounted on the Radiator. Pulling the Fan Shroud from the car requires first pushing it towards the Radiator to separate the retaining tabs and then pulling it away from the vehicle. You can install the Fan Shroud by pushing it upward first but should pull it downward to activate the retaining tabs. Position the outlet hose clamp onto the Radiator before installing the outlet hose to it. Cease the forward lamp harness in its retaining clips then join the fan electrical connectors while elevating the stabilizer shaft. Add the stabilizer shaft insulators together with brackets to the vehicle while making sure that the stabilizer shaft bracket bolts get tightened to 58 nm (43 ft. Lbs.). Finish the setup with inlet hose installation from the Radiator before placing its clamp and mounting the Radiator support.