How to replace the front shock absorber on 2001 Chevrolet Impala?

To replace the strut assembly, first, remove strut to body mount nuts three of them, and so raise and support the vehicle. Then, take the tire and wheel apart and detach the stabilizer shaft link from the strut. Scribe the strut to knuckle and when removing strut-to-knuckle bolts keep the knuckle retained to prevent damage to Ball Joint or wheel drive shaft. Take out the strut to knuckle bolts and strut out of the vehicle. In the process of installation, do handle the suspension coil spring with care so as not to destroy the coating and experience premature failure. Fasten the strut into the place with the strut to knuckle bolt and tighten it to 122 nm (90ft. Lbs.). Reconnect the stabilizer shaft link to the strut then install the tire and wheel then install the three strut to the body mount nuts, tight them and tighten to 41 nm (30 ft lbs.). Finally, lower the vehicle and set the rear alignment.

OEM 2001 Chevrolet Impala Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2001 Chevrolet Impala Strut
Part Number: 88965467
$118.69 MSRP: $212.92
You Save: $94.23 (45%)
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 22064733, 22064793, 22064745, 22064754, 22064750, 22064755, 22400002, 22064717, 22064784, 22064716, 22064774, 22064707
- Item Weight: 12.70 Pounds
- Item Dimensions: 24.3 x 9.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2001 Chevrolet Impala Strut
Part Number: 88965469
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22064710, 22400003, 22064747, 15846384, 22064752, 22064751, 22064736, 15846385, 22064753
- Item Weight: 14.80 Pounds
- Item Dimensions: 9.3 x 8.3 x 25.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2001 Chevrolet Impala Shock Absorber

With a comprehensive array of OEM 2001 Chevrolet Impala Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Impala Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Impala Shock Absorber Parts Questions & Experts Answers

Q: How to replace the front shock absorber on 2001 Chevrolet Impala?
A: To replace the strut assembly, first, remove strut to body mount nuts three of them, and so raise and support the vehicle. Then, take the tire and wheel apart and detach the stabilizer shaft link from the strut. Scribe the strut to knuckle and when removing strut-to-knuckle bolts keep the knuckle retained to prevent damage to Ball Joint or wheel drive shaft. Take out the strut to knuckle bolts and strut out of the vehicle. In the process of installation, do handle the suspension coil spring with care so as not to destroy the coating and experience premature failure. Fasten the strut into the place with the strut to knuckle bolt and tighten it to 122 nm (90ft. Lbs.). Reconnect the stabilizer shaft link to the strut then install the tire and wheel then install the three strut to the body mount nuts, tight them and tighten to 41 nm (30 ft lbs.). Finally, lower the vehicle and set the rear alignment.