How to replace the front wheel speed sensor on 2001 Chevrolet Lumina?

You should elevate and stabilize the vehicle before starting this task. Take off the electrical connector from the front before unscrewing the sensor pigtail wire bolt and both fasteners that attach the sensor to the Steering Knuckle. Once all bolts are unthreaded the sensor can be taken out. Insert the guide pins of the sensor into their correct positions before placing it into position. Place the front Wheel Speed Sensor into position and fasten it with the retaining bolts. Tighten these bolts to 70 nm (52 lb ft). Secure the electrical connector back to the front Wheel Speed Sensor last.

OEM 2001 Chevrolet Lumina Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
2001 Chevrolet Lumina ABS Sensor
Part Number: 10456116
Product Specifications
- Other Name: Sensor, Electronic Brake Control; ABS Wheel Speed Sensor; Speed Sensor; Harness
- Replaces: 10472134
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.7 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456116
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Lumina Wheel Speed Sensor

With a comprehensive array of OEM 2001 Chevrolet Lumina Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Parts Questions & Experts Answers

Q: How to replace the front wheel speed sensor on 2001 Chevrolet Lumina?
A: You should elevate and stabilize the vehicle before starting this task. Take off the electrical connector from the front before unscrewing the sensor pigtail wire bolt and both fasteners that attach the sensor to the Steering Knuckle. Once all bolts are unthreaded the sensor can be taken out. Insert the guide pins of the sensor into their correct positions before placing it into position. Place the front Wheel Speed Sensor into position and fasten it with the retaining bolts. Tighten these bolts to 70 nm (52 lb ft). Secure the electrical connector back to the front Wheel Speed Sensor last.