How to replace the rear wheel speed sensor on Chevrolet Lumina?

For Wheel Speed Sensor replacement put the vehicle on a suitable hoist at the appropriate height and take out the rear tire and wheel unit. Accessible next to the rear strut sits the rear Wheel Speed Sensor electrical connection. You must remove it. Take out the hub and bearing set since speed sensors and rings are built into the components which need to be replaced together. Place the hub and bearing assembly on the vehicle and restore the rear Wheel Speed Sensor connections before putting back the wheel tires. Put the car on its lowest position then place the ignition switch to on with no engine power before doing the system test.

OEM Chevrolet Lumina Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
Chevrolet Lumina ABS Sensor
Part Number: 10456116
Product Specifications
- Other Name: Sensor, Electronic Brake Control; ABS Wheel Speed Sensor; Speed Sensor; Harness
- Replaces: 10472134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Lumina Wheel Speed Sensor

Our website offers an extensive catalog of genuine Chevrolet Lumina Wheel Speed Sensor at unbeatable prices. Every OEM Chevrolet Lumina Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Lumina Wheel Speed Sensor Parts Questions & Experts Answers

ABS Sensor
10456116
Q: How to replace the rear wheel speed sensor on Chevrolet Lumina?
A: For Wheel Speed Sensor replacement put the vehicle on a suitable hoist at the appropriate height and take out the rear tire and wheel unit. Accessible next to the rear strut sits the rear Wheel Speed Sensor electrical connection. You must remove it. Take out the hub and bearing set since speed sensors and rings are built into the components which need to be replaced together. Place the hub and bearing assembly on the vehicle and restore the rear Wheel Speed Sensor connections before putting back the wheel tires. Put the car on its lowest position then place the ignition switch to on with no engine power before doing the system test.