How to replace the brake caliper bracket on Chevrolet Lumina?

Start by taking off the caliper before replacing the brake caliper bracket. Begin by unscrewing the caliper mounting bracket bolts with the J 36721 (Front Caliper Bracket Torx Bit). Remove the caliper mounting bracket following which detach the bushings. Check the bracket for damage then get a new one when needed. During installation always replace any damaged or removed fasteners because skipping this step could cause both vehicle control failure and personal injuries. Silicone grease lubricates the new bushings before they are installed into the anchor bracket. Use J 36721 to reinstall the caliper mounting bracket before you fasten caliper bracket mounting bolts to 185 Nm (137 ft. lbs.). Finally, reinstall the caliper.

OEM Chevrolet Lumina Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Caliper Brackets found

View related parts
Chevrolet Lumina Caliper Support, Front Part Number: 18060197
$60.59 MSRP: $82.95
You Save: $22.36 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount Bracket
- Position: Front
- Replaces: 18022078
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 2.2L L4, 2.5L L4, 3.1L V6, 3.4L V6, 3.8L V6, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Caliper Bracket Part Number: 18029822
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 18020633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Lumina Brake Caliper Bracket

Our website offers an extensive catalog of genuine Chevrolet Lumina Brake Caliper Bracket at unbeatable prices. Every OEM Chevrolet Lumina Brake Caliper Bracket comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Lumina Brake Caliper Bracket Parts Questions & Experts Answers

Caliper Support, Front
18060197
Q: How to replace the brake caliper bracket on Chevrolet Lumina?
A: Start by taking off the caliper before replacing the brake caliper bracket. Begin by unscrewing the caliper mounting bracket bolts with the J 36721 (Front Caliper Bracket Torx Bit). Remove the caliper mounting bracket following which detach the bushings. Check the bracket for damage then get a new one when needed. During installation always replace any damaged or removed fasteners because skipping this step could cause both vehicle control failure and personal injuries. Silicone grease lubricates the new bushings before they are installed into the anchor bracket. Use J 36721 to reinstall the caliper mounting bracket before you fasten caliper bracket mounting bolts to 185 Nm (137 ft. lbs.). Finally, reinstall the caliper.