How to replace the front wheel bearing on Chevrolet Lumina?

To replace the front wheel drive shaft bearing, lift and support the vehicle sufficiently. Take off the wheel and tire without reaching the nut in order to prevent a permanent bearing damage. Loosen the drive axle shaft nut, one turn is enough and then get rid of the caliper and mounting bracket followed with the rotor. Then after that take out the drive axle shaft nut and loosen the hub/bearing to knuckle/strut attaching bolts. Insert the front hub spindle remover (J 28733-B) and push the axle splines back out of the hub/bearing, being sure to avoid damaging the axle seals. Remove the bolts which hold the hub/bearing being attached to the knuckle, then remove the ABS Sensor bolting then position the ABS Sensor aside to avoid getting damaged before removing the hub/bearing. Check all components for wear or damage. For installation: position the hub/bearing on axle shaft splines and install the knuckle to hub / bearing attach bolts. Hold the ABS Sensor and fix it using the mounting bolt , rotor to it , brake caliper and mounting bracket. Replace a new drive axle nut and tighten the drive axle nut to 215 nm (159 ft. Lbs.). Finally, mount the tire and wheel assembly and lower the vehicle.

OEM Chevrolet Lumina Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wheel Bearings found

View related parts
Chevrolet Lumina Front Hub & Bearing
Part Number: 7466983
$343.24 MSRP: $615.68
You Save: $272.44 (45%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Shaft; Wheel Hub Assembly; Axle Bearing
- Position: Front
- Replaced by: 07470625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Front Hub & Bearing
Part Number: 7466982
$343.24 MSRP: $615.68
You Save: $272.44 (45%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Shaft; Wheel Hub Assembly; Axle Bearing
- Position: Front
- Replaced by: 07470625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Hub & Bearing Assembly, Rear
Part Number: 7466987
$180.59 MSRP: $339.14
You Save: $158.55 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Wheel Bearing; Axle Bearing
- Position: Rear
- Replaced by: 7470581
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Hub Assembly, Front
Part Number: 7470625
Product Specifications
- Other Name: Hub F; Wheel Bearing and Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Hub & Bearing; Bearing, Front Wheel Drive Axle Shaft; Hub, Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Hub & Bearing, Rear
Part Number: 7470609
Product Specifications
- Other Name: Hub Assembly Rear Wheel (W/ Bearing & Sensor); Wheel Bearing & Hub Assembly; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Hub & Bearing, Rear
Part Number: 7470545
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Lumina | Base, Euro, LS, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Wheel Bearing, Rear
Part Number: 7470503
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub Assembly; Bearing Assembly; Rear Bearing; Hub & Bearing; Hub; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001, 1990-1994 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Shaft Bearing
Part Number: 453897
Product Specifications
- Other Name: Bearing-Trans Output Shaft; Bearing, Front Wheel Drive Axle Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Euro, Z34 | 6 Cyl 3.4 L GAS

Chevrolet Lumina Wheel Bearing

Our website offers an extensive catalog of genuine Chevrolet Lumina Wheel Bearing at unbeatable prices. Every OEM Chevrolet Lumina Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Lumina Wheel Bearing Parts Questions & Experts Answers

Hub Assembly, Front
7470625
Q: How to replace the front wheel bearing on Chevrolet Lumina?
A: To replace the front wheel drive shaft bearing, lift and support the vehicle sufficiently. Take off the wheel and tire without reaching the nut in order to prevent a permanent bearing damage. Loosen the drive axle shaft nut, one turn is enough and then get rid of the caliper and mounting bracket followed with the rotor. Then after that take out the drive axle shaft nut and loosen the hub/bearing to knuckle/strut attaching bolts. Insert the front hub spindle remover (J 28733-B) and push the axle splines back out of the hub/bearing, being sure to avoid damaging the axle seals. Remove the bolts which hold the hub/bearing being attached to the knuckle, then remove the ABS Sensor bolting then position the ABS Sensor aside to avoid getting damaged before removing the hub/bearing. Check all components for wear or damage. For installation: position the hub/bearing on axle shaft splines and install the knuckle to hub / bearing attach bolts. Hold the ABS Sensor and fix it using the mounting bolt , rotor to it , brake caliper and mounting bracket. Replace a new drive axle nut and tighten the drive axle nut to 215 nm (159 ft. Lbs.). Finally, mount the tire and wheel assembly and lower the vehicle.

Related Chevrolet Lumina Parts

Browse Chevrolet Lumina Wheel Bearing by Years

2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990