Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 7470625
Hub Assembly, Front

1988-2001 GM

Customer Questions & Expert Answers (3)
GM 7470625 Hub Assembly, Front
  • Part Description
    Hub F; Wheel Bearing and Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 7470625 Hub Assembly, Front is Ref No. 25 in the diagram below

    1990 Chevy Lumina Hub Assembly, Front Diagram for 7470625
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 7470625

  • Vehicle Fitment

    Year Make Model Trim Engine
    1988-1996 Buick RegalCustom, Gran Sport, Limited, Olympic Gold Edition6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1990-2001 Chevrolet LuminaBase, Euro, LS, LTZ, Z344 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1995-1999 Chevrolet Monte CarloIndianapolis 500 Pace Car, LS, Z346 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1997 Oldsmobile CutlassGLS6 Cyl 3.1 L GAS
    1988-1997 Oldsmobile Cutlass SupremeBase, Indy 500 Pace Car, International, S, SL4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1988-1996 Pontiac Grand PrixBase, GT, GTP, LE, Mclaren, SE, STE4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 7470625 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 7470625 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front wheel bearing on Chevrolet Lumina? Posted by Customer
    A:
    To replace the front wheel drive shaft bearing, lift and support the vehicle sufficiently. Take off the wheel and tire without reaching the nut in order to prevent a permanent bearing damage. Loosen the drive axle shaft nut, one turn is enough and then get rid of the caliper and mounting bracket followed with the rotor. Then after that take out the drive axle shaft nut and loosen the hub/bearing to knuckle/strut attaching bolts. Insert the front hub spindle remover (J 28733-B) and push the axle splines back out of the hub/bearing, being sure to avoid damaging the axle seals. Remove the bolts which hold the hub/bearing being attached to the knuckle, then remove the ABS Sensor bolting then position the ABS Sensor aside to avoid getting damaged before removing the hub/bearing. Check all components for wear or damage. For installation: position the hub/bearing on axle shaft splines and install the knuckle to hub / bearing attach bolts. Hold the ABS Sensor and fix it using the mounting bolt , rotor to it , brake caliper and mounting bracket. Replace a new drive axle nut and tighten the drive axle nut to 215 nm (159 ft. Lbs.). Finally, mount the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the rear wheel hub and bearing for the 2001 Chevrolet Lumina? Posted by Customer
    A:
    Take out the rear wheel hub and bearing from the knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hub Assembly, Front 7470625 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 7470625 Hub Assembly, Front is available in the market under the name GM Wheel Bearing, Wheel Hub. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 7470625 Hub Assembly, Front fits certain Chevrolet Lumina, Monte Carlo models, as well as Buick Regal. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Cutlass, Cutlass Supreme models.
The original GM component designated by manufacturer part number 7470625 maintains top performance when functioning as the Hub F; Wheel Bearing and Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing. unit at its Front. The component 7470625 is constructed from durable material and its dimensions span 6.9 x 7.0 x 6.8 inches while weighing 8.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub & Bearing; Bearing, Front Wheel Drive Axle Shaft; Hub, Front Wheel. The part 7470625 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.