OEM 2001 Chevrolet Malibu Harmonic Balancer

2001 Chevrolet Malibu Harmonic Balancer Parts Questions & Experts Answers

• Q: How to replace the harmonic balancer on 2001 Chevrolet Malibu?

  A: The replacement procedure for crankshaft balancer requires ownership of Harmonic Balancer puller (J24420-C) and crankshaft balancer installer (J29113). Start by taking out the Drive Belt before raising and supporting the vehicle. The replacement process begins with tire and wheel removal from the vehicle's right front position before proceeding to the right engine splash shield and Flywheel inspection cover eliminations. A technician should remove the retaining bolt of the balancer as an assistant maintains hold on the Flywheel to stop its rotation. The Harmonic Balancer puller (J24420-C) requires installation on the balancer before turning the puller screw to unlock the balancer from its position. When installing the parts use engine oil on the front cover seal contact area and gm rtv p/n 1052917 or an equivalent sealant on the crankshaft key and keyway. Set the balancer onto its key position before using the crankshaft balancer installer (J29113) to draw the balancer into its proper placement. Use the balancer retaining bolt to install the balancer under repeated Flywheel support from a helper who will tighten it to 103 nm (76 ft. Lbs.). As the last step complete the procedure by installing the Drive Belt while lowering the vehicle and then reattaching the right engine splash shield and right tire and wheel and finally the Flywheel inspection cover. Run the crankshaft position learn variation procedure as the final step to finish the process.