OEM 2001 Chevrolet Malibu Oil Filter

2001 Chevrolet Malibu Oil Filter Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2001 Chevrolet Malibu?

  A: Start engine oil replacement by positioning the vehicle on a suitable height and supporting it while placing the oil drain pan beneath the engine oil Drain Plug. Before installation replace the engine oil Drain Plug while performing checks for damage and defects and fix or purchase a new one if needed. The sealing area of the Oil Pan requires inspection before cleaning. Any necessary repairs must occur before installation or replacement. The next step requires removing the Oil Filter followed by inspection of the engine block sealing area before any necessary repairs or replacements take place. The new Oil Filter requires a gentle coating of fresh engine oil which should be used to mount the filter onto its position then properly tighten it with 3/4-1 full turn after the gasket comes into contact with the mounting surface. Fasten the engine oil Drain Plug while tightening it to 25 nm (18 ft. Lbs.) and remove the oil drain pan before lowering the vehicle. Start the engine after adding fresh engine oil and search for any leakage spots. Let the engine run without power for several minutes to permit oil return to the Oil Pan. Pull the indicator from the tube then wipe the indicator end before reinserting it to reach the top of the tube. Slowly withdraw the indicator while keeping its end facing downwards then check the oil volume. You should check and potentially modify the engine oil level through addition or drain of fluid.