How to replace the front side door handle on 2001 Chevrolet Monte Carlo?

The first procedure for a monte carlo front side door replacement includes raising the window completely while using two layers of masking tape around the painted areas. Before proceeding detach each component consisting of the front door trim panel, water deflector, and rear window channel bolt. Subsequently pull down to unlock the rear window channel from the front door slot. You must separate the outside Door Handle rod-to-lock clip from its position on the lock while also taking away the front door outside handle lockcylinder. Reach one of the two bolts that connect the outer Door Handle through the hole plug before taking out both the outer Door Handle and its rod. To mount the lockcylinder retainer clip fasten it to the Door Handle before joining the handle rod. Secure the front outside Door Handle to the door by tightening bolts to reach 10 n.m (89 lb in). Install the lockcylinder together with a fresh outside handle rod-to-lock clip on the door lock lever so the handle rod fits properly inside the clip without free movement. Use the clip cover to enclose the threaded outside handle rod before you install the rear window channel and fasten it using the bolt which should be tightened to 10 n.m (89 lb in). The last steps should include reinstallation of the access hole plug followed by the water deflector and trim panel.

OEM 2001 Chevrolet Monte Carlo Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Handles found

View related parts
2001 Chevrolet Monte Carlo Handle, Outside, Blue, Passenger Side
Part Number: 10435890
$52.31 MSRP: $74.85
You Save: $22.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 4.9 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10435890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Outside, Blue, Driver Side
Part Number: 10435891
$42.33 MSRP: $81.45
You Save: $39.12 (49%)
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 10436864, 10436866
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 5.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10435891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Inside, Passenger Side
Part Number: 10434212
$11.77 MSRP: $21.27
You Save: $9.50 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Inside, Black, Driver Side
Part Number: 10434205
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside *Black; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 5.9 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Inside, Driver Side
Part Number: 10434211
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 5.7 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Inside, Driver Side
Part Number: 10434213
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Handle, Inside, Passenger Side
Part Number: 10434210
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 5.7 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Monte Carlo Door Handle

With a comprehensive array of OEM 2001 Chevrolet Monte Carlo Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Monte Carlo Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the front side door handle on 2001 Chevrolet Monte Carlo?
A: The first procedure for a monte carlo front side door replacement includes raising the window completely while using two layers of masking tape around the painted areas. Before proceeding detach each component consisting of the front door trim panel, water deflector, and rear window channel bolt. Subsequently pull down to unlock the rear window channel from the front door slot. You must separate the outside Door Handle rod-to-lock clip from its position on the lock while also taking away the front door outside handle lockcylinder. Reach one of the two bolts that connect the outer Door Handle through the hole plug before taking out both the outer Door Handle and its rod. To mount the lockcylinder retainer clip fasten it to the Door Handle before joining the handle rod. Secure the front outside Door Handle to the door by tightening bolts to reach 10 n.m (89 lb in). Install the lockcylinder together with a fresh outside handle rod-to-lock clip on the door lock lever so the handle rod fits properly inside the clip without free movement. Use the clip cover to enclose the threaded outside handle rod before you install the rear window channel and fasten it using the bolt which should be tightened to 10 n.m (89 lb in). The last steps should include reinstallation of the access hole plug followed by the water deflector and trim panel.