How to replace the front brake disc splash shield on 2001 GMC Jimmy?

Replacing the front disc brake splash shield begins by supporting the vehicle through raising it. Before disconnecting the brake caliper from its mount you must support it with equivalent heavy mechanic's wire or another device to maintain connection with the hydraulic flexible brake hose unless you risk brake fluid leakage from damage to the hose. Start by removing successively the hub and bearing assembly and then the splash shield. The installation process starts with placing the splash shield followed by installing both hub and bearing assembly and finishing off with tire and wheel assembly before lowering down the vehicle. You should apply the brake pedal with the engine shut off while using moderate force to reach about two-thirds of its travel distance before releasing it slowly. Repetition of this procedure requires waiting 15 seconds followed by more applications to reach a solid brake pedal state that confirms correct positioning of brake caliper pistons and brake pads.

OEM 2001 GMC Jimmy Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2001 GMC Jimmy Rotor Part Number: 15704667
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 16.10 Pounds
- Item Dimensions: 14.0 x 13.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15704667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Jimmy Rotor Part Number: 15733196
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 15.20 Pounds
- Item Dimensions: 16.5 x 16.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15733196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Jimmy Brake Rotor, Front Part Number: 19211905
Product Specifications
- Other Name: Rotor Assembly, Front Brake (W/Hub); Disc Brake Hardware Kit; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060219, 15733699, 19152694, 18060691
- Item Weight: 13.30 Pounds
- Item Dimensions: 11.9 x 11.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19211905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

2001 GMC Jimmy Brake Disc

With a comprehensive array of OEM 2001 GMC Jimmy Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Jimmy Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Jimmy Brake Disc Parts and Q&A

Q: How to replace the front brake disc splash shield on 2001 GMC Jimmy?
A: Replacing the front disc brake splash shield begins by supporting the vehicle through raising it. Before disconnecting the brake caliper from its mount you must support it with equivalent heavy mechanic's wire or another device to maintain connection with the hydraulic flexible brake hose unless you risk brake fluid leakage from damage to the hose. Start by removing successively the hub and bearing assembly and then the splash shield. The installation process starts with placing the splash shield followed by installing both hub and bearing assembly and finishing off with tire and wheel assembly before lowering down the vehicle. You should apply the brake pedal with the engine shut off while using moderate force to reach about two-thirds of its travel distance before releasing it slowly. Repetition of this procedure requires waiting 15 seconds followed by more applications to reach a solid brake pedal state that confirms correct positioning of brake caliper pistons and brake pads.