OEM 2001 GMC Jimmy Power Steering Reservoir

2001 GMC Jimmy Parts Questions & Experts Answers

• Q: How to replace the Power Steering Reservoir on 2001 GMC Jimmy?

  A: The power steering fluid drainage from the Power Steering Pump must happen before starting the replacement of the reservoir off the vehicle. Start by unthreading the pump mounting studs before extracting the connector and fitting assembly which brings out both its o-ring seal and other attached parts. The reservoir assembly should be disconnected from the pump housing assembly followed by the removal of o-ring seals , , and . You should first remove the magnet before performing cleanliness operations on it. Check the welch plug inside the Power Steering Pump housing for damage but do not remove it as replacement of the Power Steering Pump housing might become necessary if the plug is deformed or dislodged. Use newly replaced o-ring seals that require power steering fluid lubrication before applying them to the pump housing assembly during reassembly. After attaching the magnet to the pump housing assembly you should connect the reservoir assembly followed by installing its o-ring seal. Install the pump housing assembly by connecting its connector and fitting assembly then attach the pump mounting studs . The installation includes tightening the mounting studs of the pump at 35 - 80 nm (29 - 59 ft. Lbs.) along with tightening the connector and fitting assembly to 75 nm (55 ft. Lbs.).