How to replace the left engine mount on 2001 GMC Savana 1500?

The replacement of a left Engine Mount begins with taking off the upper Fan Shroud followed by vehicle elevation. To begin the replacement of the Engine Mount start by taking out the through-bolt along with its nut from the engine mounting on the side which needs to be changed. The vehicle demands removal of the Starter when handling right side engine mounts. Have caution when supporting the engine by using any jack equipment since placing it beneath the Oil Pan or any sheet metal or crankshaft balancer may cause damage. Use a jack on the square tab at the engine block rear to lift the motor just enough for removing the mount while checking for dash panel clearance. Remove the bolts linking the Engine Mount to the Engine Mount frame bracket followed by separating the Engine Mount from its proper position. The procedure to remove the Engine Mount engine bracket begins with unbolted bolts from the Engine Mount engine bracket followed by extracting the bracket while potentially needing to remove the heat shield. The first installation step requires attaching the heat shield followed by bolt tightening to 6 nm (53 inch lbs.) before proceeding to install the Engine Mount engine bracket along with its bolts and tightening them to 54 nm (40 ft. Lbs.). The procedure for installing the Engine Mount consists of attaching the mount itself along with the Engine Mount to Engine Mount frame bracket bolts which should be tightened to 58 nm (43 ft. Lbs.). Lower the engine to insert the Engine Mount through-bolt and install both the mount through-bolt along with its nut while torquing it to 68 nm (50 ft. Lbs.). Begin by reinstalling the Starter and then proceed with lowering the vehicle and concluding with the upper Fan Shroud installation.

OEM 2001 GMC Savana 1500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
2001 GMC Savana 1500 Mount Bracket
Part Number: 15027096
$11.69 MSRP: $15.43
You Save: $3.74 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.8 x 5.8 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15027096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket, Driver Side
Part Number: 15969184
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.9 x 7.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15969184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
2001 GMC Savana 1500 Front Mount
Part Number: 22188659
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 22146151
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.0 x 7.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22188659
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket, Passenger Side
Part Number: 15054180
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 15969180
- Item Weight: 1.90 Pounds
- Item Dimensions: 10.7 x 8.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15054180
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket, Passenger Side
Part Number: 15969182
Product Specifications
- Other Name: Bracket Assembly-Engine Mount (Right-Hand); Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Position: Passenger Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 11.6 x 9.3 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15969182
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket, Driver Side
Part Number: 15969179
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.0 x 8.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15969179
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket
Part Number: 15969183
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.2 x 7.1 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15969183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
2001 GMC Savana 1500 Mount Bracket, Driver Side
Part Number: 15969181
Product Specifications
- Other Name: Bracket Assembly-Engine Mount (Left-Hand); Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Position: Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 11.6 x 9.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15969181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS

2001 GMC Savana 1500 Engine Mount

With a comprehensive array of OEM 2001 GMC Savana 1500 Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 1500 Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Savana 1500 Engine Mount Parts Questions & Experts Answers

Q: How to replace the left engine mount on 2001 GMC Savana 1500?
A: The replacement of a left Engine Mount begins with taking off the upper Fan Shroud followed by vehicle elevation. To begin the replacement of the Engine Mount start by taking out the through-bolt along with its nut from the engine mounting on the side which needs to be changed. The vehicle demands removal of the Starter when handling right side engine mounts. Have caution when supporting the engine by using any jack equipment since placing it beneath the Oil Pan or any sheet metal or crankshaft balancer may cause damage. Use a jack on the square tab at the engine block rear to lift the motor just enough for removing the mount while checking for dash panel clearance. Remove the bolts linking the Engine Mount to the Engine Mount frame bracket followed by separating the Engine Mount from its proper position. The procedure to remove the Engine Mount engine bracket begins with unbolted bolts from the Engine Mount engine bracket followed by extracting the bracket while potentially needing to remove the heat shield. The first installation step requires attaching the heat shield followed by bolt tightening to 6 nm (53 inch lbs.) before proceeding to install the Engine Mount engine bracket along with its bolts and tightening them to 54 nm (40 ft. Lbs.). The procedure for installing the Engine Mount consists of attaching the mount itself along with the Engine Mount to Engine Mount frame bracket bolts which should be tightened to 58 nm (43 ft. Lbs.). Lower the engine to insert the Engine Mount through-bolt and install both the mount through-bolt along with its nut while torquing it to 68 nm (50 ft. Lbs.). Begin by reinstalling the Starter and then proceed with lowering the vehicle and concluding with the upper Fan Shroud installation.