How to remove and install the Body Control Module (BCM) on 2002 Buick Century?

Unplug the bcm by first disconnecting the vehicle battery then taking out the left panel insulator assembly. Move the bcm upward until you can separate its bottom from the mounting bracket slot. To install the bcm fit the top of it into the mounting bracket then position it carefully so the bottom end reaches the mounting slot. Reconnect the bcm electrical connections then install back the left instrument panel insulator. Install the new bcm before programming and setting up its rpo configuration.

OEM 2002 Buick Century Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
2002 Buick Century Express Module
Part Number: 12533707
Product Specifications
- Other Name: Module, Sun Roof Control; Module
- Item Weight: 0.50 Pounds
- Item Dimensions: 9.5 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12533707
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS

2002 Buick Century Body Control Module

With a comprehensive array of OEM 2002 Buick Century Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Century Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Century Parts Questions & Experts Answers

Q: How to remove and install the Body Control Module (BCM) on 2002 Buick Century?
A: Unplug the bcm by first disconnecting the vehicle battery then taking out the left panel insulator assembly. Move the bcm upward until you can separate its bottom from the mounting bracket slot. To install the bcm fit the top of it into the mounting bracket then position it carefully so the bottom end reaches the mounting slot. Reconnect the bcm electrical connections then install back the left instrument panel insulator. Install the new bcm before programming and setting up its rpo configuration.