How to remove and install the Body Control Module (BCM) on Buick Century?

You should disconnect the battery ground (negative) cable first to remove the Body Control Module. You must reset the BCM system when installing a new unit. Take out the left panel insulator before disconnecting BCM electrical wiring. Pull the BCM body upward and move its bottom section away from the mounting bracket slot to take it out. Place the top end of the BCM into the holding plate and push the bottom end into the slot while supporting it from above. Reattach the BCM electrical connections after you install the left instrument panel insulator and complete the procedure by connecting the negative battery cable.

OEM Buick Century Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Body Control Modules found

View related parts
Buick Century Control Module
Part Number: 10408961
Product Specifications
- Other Name: Module, Headlamp/Fog Lamp/Turn Signal
- Replaces: 10407671
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Century | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Century Express Module
Part Number: 12533707
Product Specifications
- Other Name: Module, Sun Roof Control; Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Buick Century | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Century Control Module
Part Number: 10098680
Product Specifications
- Other Name: Module, Headlamp/Fog Lamp/Turn Signal; Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Century | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS

Buick Century Body Control Module

Our website offers an extensive catalog of genuine Buick Century Body Control Module at unbeatable prices. Every OEM Buick Century Body Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Century Body Control Module Parts Questions & Experts Answers

Express Module
12533707
Q: How to remove and install the Body Control Module (BCM) on Buick Century?
A: You should disconnect the battery ground (negative) cable first to remove the Body Control Module. You must reset the BCM system when installing a new unit. Take out the left panel insulator before disconnecting BCM electrical wiring. Pull the BCM body upward and move its bottom section away from the mounting bracket slot to take it out. Place the top end of the BCM into the holding plate and push the bottom end into the slot while supporting it from above. Reattach the BCM electrical connections after you install the left instrument panel insulator and complete the procedure by connecting the negative Battery Cable.