OEM 2002 Buick LeSabre Fuel Filler Hose

2002 Buick LeSabre Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2002 Buick LeSabre?

  A: A successful Fuel Filler Hose replacement requires draining the Fuel Tank beneath its Fuel Filler Hose position. After raising the vehicle you must eliminate the wheel house filler pipe opening cover from the vehicle. Before you eliminate the fuel filler pipe, you must first remove the Fuel Tank filler pipe ground wire bolt along with the fuel filler pipe clamp. Begin installation by fixing the fuel filler pipe followed by installing the fuel filler pipe clamp while tightening it to 3.5 n.m (31 lb in). Screw and tighten the Fuel Tank filler pipe ground wire bolt until it reaches 9 n.m (80 lb in). The technician reattaches the wheel house filler pipe opening cover then lowers the vehicle before adding fuel to the tank. Once the Fuel Tank filler pipe cap is set in place, install the negative Battery Cable and look for leakages by turning the ignition on for 2 seconds followed by turning it off for 10 seconds before turning it on again to check for leaking fluid. The last step involves fuel injector sight shield installation.