How to replace the right engine mount on 2002 Buick Park Avenue?

Vehicle elevation and engine support using an appropriate jack is necessary to replace the right Engine Mount. Using a jack and removing the right Engine Mount nut enables engine descent after lowering the jack slightly. You need to eliminate the bolt along with both nuts which hold the mount to the body frame rail before removing the right Engine Mount. The right Engine Mount needs positioning against the body frame rail with proper attachment of the bolt and nut. Fasten the right Engine Mount to the body frame rail by installing two nuts then tighten them (1, 2) to 70 nm (52 ft. Lbs.). Lift the engine into position before installing the nut which joins the right Engine Mount to the right Engine Mount Bracket while finishing the tightening process at 80 nm (59 ft lbs). Finish the procedure by using the engine support jack to drive down your vehicle.

OEM 2002 Buick Park Avenue Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2002 Buick Park Avenue Transmission Mount
Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Support
Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2002 Buick Park Avenue Engine Mount

With a comprehensive array of OEM 2002 Buick Park Avenue Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Park Avenue Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the right engine mount on 2002 Buick Park Avenue?
A: Vehicle elevation and engine support using an appropriate jack is necessary to replace the right Engine Mount. Using a jack and removing the right Engine Mount nut enables engine descent after lowering the jack slightly. You need to eliminate the bolt along with both nuts which hold the mount to the body frame rail before removing the right Engine Mount. The right Engine Mount needs positioning against the body frame rail with proper attachment of the bolt and nut. Fasten the right Engine Mount to the body frame rail by installing two nuts then tighten them (1, 2) to 70 nm (52 ft. Lbs.). Lift the engine into position before installing the nut which joins the right Engine Mount to the right Engine Mount Bracket while finishing the tightening process at 80 nm (59 ft lbs). Finish the procedure by using the engine support jack to drive down your vehicle.