Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25710672
Motor Mount, Passenger Side

1998-2005 GM

Customer Questions & Expert Answers (63)
GM 25710672 Motor Mount, Passenger Side
GM 25710672 Motor Mount, Passenger Side
GM 25710672 Motor Mount, Passenger Side
GM 25710672 Motor Mount, Passenger Side
  • Part Description
    Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount
  • Position
    Passenger Side
  • Replaces
    25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2002 Oldsmobile Aurora Motor Mount, Passenger Side Diagram for 25710672
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25710672

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2000-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25710672 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25710672 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the right engine mount for the 2001 Buick LeSabre? Posted by Customer
    A:
    Raise and support the vehicle, then support the engine assembly with a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the installation process for the 2002 Buick LeSabre? Posted by Customer
    A:
    Raise the engine into position and install the nut securing the right engine mount to the right engine mount bracket, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the right engine mount bracket for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the right engine mount for the 2002 Buick LeSabre? Posted by Customer
    A:
    Raise and support the vehicle, then support the engine assembly with a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Remove the engine support jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be used to support the transaxle for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Use a transaxle support stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after the retaining bolts for the 2002 Buick Park Avenue? Posted by Customer
    A:
    The mount and the mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What hoses need to be detached from the rack and pinion for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Detach the power steering pressure hose and return hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2004 Buick LeSabre? Posted by Customer
    A:
    The power steering gear heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for the transmission mount lower bolts and nut for the 2002 Buick LeSabre? Posted by Customer
    A:
    Tighten them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2000 Buick LeSabre? Posted by Customer
    A:
    Remove the left front tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2005 Buick LeSabre? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What hoses need to be detached from the rack and pinion for the 2005 Buick LeSabre? Posted by Customer
    A:
    Detach the power steering pressure hose and the power steering return hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after supporting the engine assembly for the 2000 Buick LeSabre? Posted by Customer
    A:
    Remove the nut securing the engine mount to the engine mount bracket, and lower the jack slightly to allow the engine to lower.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What do you do after removing the bolt and nuts for the 2005 Buick LeSabre? Posted by Customer
    A:
    Take out the right engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after positioning the bracket for the 2001 Buick LeSabre? Posted by Customer
    A:
    Install the right engine mount bracket stud to the engine and tighten it to 8 Nm (71 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What needs to be disconnected after setting aside the power steering pump for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Disconnect the coil pack assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after raising it for the 2002 Buick LeSabre? Posted by Customer
    A:
    Remove the nut that secures the front transmission mount to the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step for installation for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Position the mount and mount bracket onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2003 Buick LeSabre? Posted by Customer
    A:
    Lower the vehicle and reinstall the front transmission mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2001 Buick LeSabre? Posted by Customer
    A:
    Remove the left front tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    Where can you find information about engine mounts for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Consult Engine Mount Inspection.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the new right engine mount for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Position the right engine mount to the body frame rail and install the attaching bolt and nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after lifting the engine assembly for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Remove the bolts and the single nut securing the mount to the frame, and then take out the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What do you do after removing the nut for the 2005 Buick LeSabre? Posted by Customer
    A:
    Lower the vehicle to take out the front transmission mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after raising the engine into position for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Install the nut securing the right engine mount to the right engine mount bracket, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after detaching the mount for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Gradually lower the powertrain using the jack stand and take out the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the new mount for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Position the rear mount onto the left frame rail and tighten the mount bolt, nut, and nuts to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Remove the engine support jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed to detach the engine mount from the engine mount bracket for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Remove the nut securing the engine mount to the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the front engine mount bracket for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Position the front engine mount bracket to the engine and loosely install the 2 upper bolts to the cylinder head.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after removing the nut from the engine mount bracket for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Lower the jack slightly to allow the engine to lower, then remove the jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the procedure for removing the right engine mount for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Remove the frame rail bolts retaining screws, then raise the vehicle again. Push up on the frame rail bolts to clear the mount as the top of the mount tilts away from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the transaxle support brace bolt for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Tighten the transaxle support brace bolt to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What are the final steps after securing the engine mount for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Remove the engine support jack, reinstall the right front wheel, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the mount be secured to the frame for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Secure the mount to the frame with the 2 nuts and tighten them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you support the engine assembly for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Use a suitable jack to support the engine assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What comes next after removing the upper bolts for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Remove the 2 nuts (Socket) that secure the front engine mount bracket to the engine block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after securing the power steering pressure hose for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Raise the engine into position and install the nut securing the right engine mount to the right engine mount bracket, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Raise and support the vehicle, then remove the right front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What conditions indicate that the transmission mount needs replacement for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Look for heat check cracks on the hard rubber surface, separation of the rubber from the metal plate, or splits through the center of the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should you do if there is movement between the metal plate of the mount and its attaching points for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Lower the transmission/transaxle and tighten the bolts or nuts securing the mount to the frame or bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after lowering the jack for the 2002 Cadillac Seville? Posted by Customer
    A:
    Remove the bolt and nut securing the mount to the frame, followed by the removal of the 2 nuts that secure the mount to the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for the nut securing the right engine mount to the bracket for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Tighten it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the sequence for tightening the nuts and bolts for the 2001 Cadillac Seville? Posted by Customer
    A:
    Tighten the lower engine mount bracket nuts to 41 Nm (30 ft. lbs.), the transaxle support brace bolt to 50 Nm (37 ft. lbs.), and the two upper engine mount bracket bolts to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the mount for the 2002 Cadillac Seville? Posted by Customer
    A:
    For installation, begin by installing the mount and ensure to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you support the engine assembly for the 2002 Cadillac Seville? Posted by Customer
    A:
    Use a suitable jack to support the engine assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed to detach the right engine mount for the 2004 Cadillac Seville? Posted by Customer
    A:
    Remove the nut securing the right engine mount to the right engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after supporting the powertrain assembly for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Remove the nut that secures the transmission mount to the transmission mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be verified before replacing an engine mount due to suspected fluid loss for the 2002 Cadillac Seville? Posted by Customer
    A:
    Verify that the source of the fluid is the engine mount, not the engine or accessories.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the tightening sequence and torque specifications for the 2000 Cadillac Seville? Posted by Customer
    A:
    Tighten the mount bracket left nut to 41 Nm (30 ft. lbs.), the mount bracket right nut to 41 Nm (30 ft. lbs.), the engine brace bolt to 50 Nm (37 ft. lbs.), the mount nut to 70 Nm (52 ft. lbs.), and the two upper mount brace bolts to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you inspect the automatic transmission mount for the 2003 Cadillac Seville? Posted by Customer
    A:
    First, raise the vehicle and verify any suspected fluid loss is from the transmission/transaxle mount, not the engine or other components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the mount be secured to the frame for the 2000 Cadillac Seville? Posted by Customer
    A:
    Secure the mount to the frame with the 2 nuts and tighten them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should you do if there is movement between the metal plate of the mount and its attaching points for the 2004 Cadillac Seville? Posted by Customer
    A:
    Lower the transmission/transaxle and tighten the bolts or nuts securing the mount to the frame or bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after attaching the mount to the frame for the 2001 Cadillac Seville? Posted by Customer
    A:
    Raise the engine and transmission assembly into position and install the nut to the mount and mount bracket, tightening it to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after tightening the frame rail retaining screws for the 2003 Cadillac Seville? Posted by Customer
    A:
    Raise the vehicle, support the engine assembly with a suitable jack, and raise it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the front engine mount for the 2002 Cadillac Seville? Posted by Customer
    A:
    Take out the 2 upper bolts securing the front engine mount bracket to the cylinder head.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the rear automatic transmission mount for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Raise and support the vehicle, then support the engine assembly with a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2001 Cadillac Seville? Posted by Customer
    A:
    Raise and support the vehicle, then remove the right front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after securing the right engine mount to the body frame rail for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Raise the engine into position and install the nut securing the right engine mount to the right engine mount bracket, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step for securing the right engine mount for the 2004 Cadillac Seville? Posted by Customer
    A:
    Raise the engine into position and install the nut securing the right engine mount to the right engine mount bracket, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Motor Mount, Passenger Side 25710672 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25710672 Motor Mount, Passenger Side is available in the market under the name GM Engine Mount, Motor And Transmission Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25710672 Motor Mount, Passenger Side fits certain Cadillac DeVille, Seville models, as well as Buick LeSabre, Park Avenue. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 25710672 maintains top performance when functioning as the Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount unit at its Passenger Side. The component 25710672 is constructed from durable material and its dimensions span 8.3 x 7.1 x 4.7 inches while weighing 4.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Mount, Engine Mount Dampening; Mount, Engine Mounting. The part 25710672 has available replacement options 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.