How to replace the engine mount on 2000 Buick LeSabre?

The replacement process for an engine mount begins with raising the vehicle while using support equipment to stabilize it before supporting the engine through suitable jack cords. First remove the nut holding the engine mount to its bracket then decrease jack height for controlled engine descent. You must first detach the bolt together with the two nuts which hold the mount to the vehicle frame before extracting the mount itself. First install the mount and position the bolt and nut onto the frame after following all necessary service precautions. The mount installation requires use of the two nuts to secure it before tightening the nuts to 70 Nm (52 ft. lbs.). Use the jack to hoist the engine and fasten the nut to mount and bracket through proper torque of 80 Nm (59 ft. lbs.). Lift the automobile and eliminate the engine support jack before completing the task.

OEM 2000 Buick LeSabre Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2000 Buick LeSabre Transmission Mount
Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2000 Buick LeSabre Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2000 Buick LeSabre Support
Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2000 Buick LeSabre Engine Mount

With a comprehensive array of OEM 2000 Buick LeSabre Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick LeSabre Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick LeSabre Parts Questions & Experts Answers

Q: How to replace the engine mount on 2000 Buick LeSabre?
A: The replacement process for an engine mount begins with raising the vehicle while using support equipment to stabilize it before supporting the engine through suitable jack cords. First remove the nut holding the engine mount to its bracket then decrease jack height for controlled engine descent. You must first detach the bolt together with the two nuts which hold the mount to the vehicle frame before extracting the mount itself. First install the mount and position the bolt and nut onto the frame after following all necessary service precautions. The mount installation requires use of the two nuts to secure it before tightening the nuts to 70 Nm (52 ft. lbs.). Use the jack to hoist the engine and fasten the nut to mount and bracket through proper torque of 80 Nm (59 ft. lbs.). Lift the automobile and eliminate the engine support jack before completing the task.