Firstly, raise and support the vehicle to replace the left side transmission mount. Referee the left engine splash shield and lift the transmission with a transmission jack. Then, i should remove the transmission mount nuts (1, 2) and the transmission mount bracket bolts (1, 2). With the help of the transmission jack, lift the transmission as much to allow for tilting the transmission mount before removing the transmission mount bracket bolt and take out the transmission mount and bracket from the vehicle. In installing the transmission mount and bracket back onto the vehicle ensure that you install the transmission mount bracket bolt and tighten it to 90 nm (66 lb ft), ensuring that the transmission mount bracket bolt is also tightened to 90 nm (66 lb ft). Lower the transmission down until the bracket of the transmission mount rests under the transmission mount. Next, install the bracket bolt of the transmission mount and tighten it to the 90 nm (66 lbft). Remove the transmission jack and install the transmission mount nut tightened to 75 nm (55 lb ft); install the transmission mount nut tightened to 90 nm (66 lb ft). Lastly, reinstall the left engine splash shield and lower the car.