Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Front Mount; Mount; Strut; Strut, Engine Mounting
Replaces: 22145938
Fits the following Buick Models:
Skylark | 1995-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut; Strut, Engine Mounting
Other Name: Strut Assembly, Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount; Strut; Strut, Engine Mount Dampening; Strut, Engine Mounting
Fits the following Buick Models:
Skylark | 1992-1993 | Custom, Gran Sport, Limited | 6 Cyl 3.3 L GAS
Other Name: Strut; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Mount; Strut, Engine Mount Dampening; Strut, Engine Mounting
Replaces: 22113211, 22112730
Fits the following Buick Models:
Skylark | 1994 | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS
Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
Fits the following Buick Models:
Century | 1995-2005 | Custom, Limited, Special, Special Edition | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
LaCrosse | 2005-2009 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Regal | 1995-2004 | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
Other Name: Strut Assembly-Engine Mount *White; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut; Strut, Engine Mount Dampening; Strut, Engine Mounting
Fits the following Buick Models:
Skylark | 1992-1994 | Custom, Limited | 4 Cyl 2.3 L GAS
Other Name: Strut; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut, Engine Mount Dampening; Strut, Engine Mounting
Fits the following Buick Models:
Century | 1995-1996 | Custom, Limited, Special | 6 Cyl 3.1 L GAS
Buick Engine Mount Torque Strut Parts Questions & Experts Answers
Q: How to replace the left Engine Mount Torque Strut on Buick LaCrosse?
A: Start with removing the bolt and nut attached to the engine mount strut located at the left engine mount strut bracket on the engine. Afterward remove the bolt and nut from the engine mount strut at the engine mount strut bracket on the upper radiator support before extracting the engine mount strut. Check the rubber elements inside the engine mount strut to determine if it exhibits any hardness problems together with splitting or cracking signs. Set the engine mount strut in its proper position before adding the bolt and nut to the engine mount strut bracket on the upper radiator support but maintain just enough tension by hand. You should install the bolt and nut to the engine mount strut at the left engine mount strut bracket located on the engine while torquing the bolt engine mount strut nuts to 48 Nm (35 ft. lbs.).
Q: How to replace the right Engine Mount Torque Strut on Buick Century?
A: The procedure for replacing the right engine mount strut starts by taking out the bolt, nut and P-clip from the engine mount strut at the left engine mount strut bracket on the engine followed by removing the bolt and nut from the engine mount strut at the engine mount strut bracket on the upper radiator support and finally extracting the engine mount strut. Check the engine mount strut rubber for hardness as well as split and cracking damage. Installation starts with mounting the engine mount strut where you secure its bolt and nut at the engine mount strut bracket on the upper radiator support and set the torque at 48 Nm (35 ft. lbs.). The engine mount strut installation requires the bolt along with P-clip and nut at the left engine mount strut bracket on the engine where the engine mount strut nut needs to be tightened up to 48 Nm (35 ft. lbs.).
Q: How to Change the Engine Mount Torque Strut on the Left Side of a Buick Regal?
A: Starting replacement of the left engine mount strut requires draining engine coolant from the cooling system. You should first remove the engine Coolant Temperature Sensor along with the radiator support clamp from the engine mount strut bolt. Start by taking off the engine mount strut at its left bracket while you remove bracket bolts before removing its strut bracket. Install the engine mount strut bracket on the head while paying attention to the specified fastener notice before applying torque of 50 nm (37 ft. Lbs.) to the engine mount strut bracket bolts. The installation process starts by attaching the engine mount strut to the left engine mount strut bracket after which you should install the radiator support clamp to the engine mount strut bolt. You should reinstall the engine Coolant Temperature Sensor followed by cooling system filling with engine coolant.