Other Name: Bracket; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Motor Mount; Rear Mount Bracket; Bracket, Transmission Mounting Support
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-1998 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
Position: Driver Side
Replaces: 25623908
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
Position: Driver Side
Replaces: 22145828, 17999341
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Buick Park Avenue Motor And Transmission Mount
Our website offers an extensive catalog of genuine Buick Park Avenue Motor And Transmission Mount at unbeatable prices. Every OEM Buick Park Avenue Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Park Avenue Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the rear automatic motor and transmission mount on Buick Park Avenue?
A: In order to replace the rear automatic transmission mount first lift and support the vehicle. Pull off the power steering gear heat shield, and disconnect the power steering pressure hose and return hose from the Rack And Pinion and hang them from the exhaust pipe. Once you support the transaxle using a transaxle support stand it is now clear to remove nuts off the mount bracket along with the lower bolts and nut from the mount. Then, remove the three retaining bolts from the mount bracket, and remove the mount and mount bracket from the vehicle. For installation, install the mount and the mount bracket on the vehicle and apply thread lock compound gm p/n 12345493 or equivalent to the rear transmission bracket bolts. Mount the bracket onto the mounting surface such that the countersunk hole on the bracket aligns with the threaded hole in the mounting surface. Then install the retaining bolts to the mount bracket and tighten them in at 63 nm (46 ft. Lbs.) of torque. Mount the lower bolts and nut onto the transmission mount, tighten them to 50 nm (37ft.lbs.) and the upper nut on the mount, tighten to 50 nm (37ft.lbs.). Then remove the transaxle support stand, reinstall the power steering return hose and pressure hose to the Rack And Pinion and then the power steering gear heat shield. Finally, lower the vehicle.