How to replace the left automatic Motor and Transmission Mount on 2001 Buick Park Avenue?

Starting the left automatic transmission mount replacement requires vehicle elevation and support. Climb under the car to remove its left front tire and wheel. Position a jack stand beneath the transmission's left side for powertrain support. Start by unscrewing the mount stud nut from the mount stud followed by removing the nut and bolt and nuts from the vehicle. After lowering the powertrain step-by-step with the jack stand remove the mount from underneath. Start installation by placing the rear mount at the left frame rail followed by tightening the mount bolt then nut then nuts to 70 Nm (52 ft. lbs.). Install the mount stud nut onto the mount stud after lifting the powertrain on the jack stand. Tighten this nut before moving forward. First replace the jack stand before installing the left front tire and wheel and then slowly lowering the vehicle down.

OEM 2001 Buick Park Avenue Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Motor And Transmission Mounts found

View related parts
2001 Buick Park Avenue Transmission Mount, White, Rear
Part Number: 25723646
$70.40 MSRP: $110.27
You Save: $39.87 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Transmission Rear *White; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
- Position: Rear
- Replaces: 25693540, 25705524
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 8.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25723646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Transmission Mount
Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Transmission Mount, Driver Side
Part Number: 25695932
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Transmission Mount; Mount; Mount, Transmission Mounting
- Position: Driver Side
- Replaces: 25662258, 25691733, 25689177, 25713700
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 6.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25695932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Support
Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Rear Mount Bracket
Part Number: 25677169
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount; Rear Bracket; Bracket, Transmission Mounting Support
- Position: Rear
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.6 x 5.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25677169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Motor And Transmission Mount

With a comprehensive array of OEM 2001 Buick Park Avenue Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the left automatic Motor and Transmission Mount on 2001 Buick Park Avenue?
A: Starting the left automatic transmission mount replacement requires vehicle elevation and support. Climb under the car to remove its left front tire and wheel. Position a jack stand beneath the transmission's left side for powertrain support. Start by unscrewing the mount stud nut from the mount stud followed by removing the nut and bolt and nuts from the vehicle. After lowering the powertrain step-by-step with the jack stand remove the mount from underneath. Start installation by placing the rear mount at the left frame rail followed by tightening the mount bolt then nut then nuts to 70 Nm (52 ft. lbs.). Install the mount stud nut onto the mount stud after lifting the powertrain on the jack stand. Tighten this nut before moving forward. First replace the jack stand before installing the left front tire and wheel and then slowly lowering the vehicle down.