How to replace the harmonic balancer on 2001 Buick Park Avenue?

The crankshaft balancer replacement process begins by removing both the Drive Belt followed by the right front tire and wheel. Utilize the flywheel holding tool (J 37096) to maintain the flywheel then loosen and remove the balancer bolt while keeping pulley and balancer together for a joint service. You should use the crankshaft balancer puller (J 38197-A) to extract the crankshaft balancer by mounting 1/4 inch bolts to the pulley and thread them in 1/4 inch. Before mounting the crankshaft balancer you must conduct both a cleaning operation and an inspection process. Engine oil applied to the seal surface before installing the crankshaft balancer with the help of flywheel holding tool (J 37096) which holds the flywheel. Fitted first tighten the crankshaft balancer bolt to 150 nm (111 ft. Lbs.), then complete the torque procedure by utilizing the torque angle meter (J 36660-A) to reach 76 degrees. The right front tire and wheel must be reinstalled after which the Drive Belt needs to be put back in place then the ckp system variation learn procedure requires execution.

OEM 2001 Buick Park Avenue Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Harmonic Balancers found

View related parts
2001 Buick Park Avenue Crankshaft Balance
Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.7 x 6.5 x 2.4 inches
- Condition: New
- SKU: 12618249
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Vibration Damper
Part Number: 12563265
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24505177
- Item Weight: 14.30 Pounds
- Item Dimensions: 8.2 x 8.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12563265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Vibration Damper
Part Number: 12563266
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Item Weight: 13.10 Pounds
- Item Dimensions: 9.1 x 4.2 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12563266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Harmonic Balancer

With a comprehensive array of OEM 2001 Buick Park Avenue Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the harmonic balancer on 2001 Buick Park Avenue?
A: The crankshaft balancer replacement process begins by removing both the Drive Belt followed by the right front tire and wheel. Utilize the flywheel holding tool (J 37096) to maintain the flywheel then loosen and remove the balancer bolt while keeping pulley and balancer together for a joint service. You should use the crankshaft balancer puller (J 38197-A) to extract the crankshaft balancer by mounting 1/4 inch bolts to the pulley and thread them in 1/4 inch. Before mounting the crankshaft balancer you must conduct both a cleaning operation and an inspection process. Engine oil applied to the seal surface before installing the crankshaft balancer with the help of flywheel holding tool (J 37096) which holds the flywheel. Fitted first tighten the crankshaft balancer bolt to 150 nm (111 ft. Lbs.), then complete the torque procedure by utilizing the torque angle meter (J 36660-A) to reach 76 degrees. The right front tire and wheel must be reinstalled after which the Drive Belt needs to be put back in place then the ckp system variation learn procedure requires execution.