How to replace the harmonic balancer on 2002 Buick Park Avenue?

To change the crankshaft balancer start by taking off the Drive Belt together with the right front tire and wheel. Utilize the flywheel holding tool (J 37096) to stabilize the flywheel while you remove the balancer bolt using care to maintain the pulley attached to the balancer since they need treatment as a complete assembly. The crankshaft balancer remover (J 38197-A) should now be used to remove the crankshaft balancer through the installation of 1/4 inch bolts onto the pulley while tightening them to 1/4 inch depth. Inspection together with cleaning steps are mandatory before the crankshaft balancer mounts. The seal surface requires engine oil lubrication before installing the crankshaft balancer while you maintain your grip on the flywheel through use of the flywheel holding tool (J 37096). Screw the crankshaft balancer bolt up to 150 nm (111 ft. Lbs.), apply the torque angle meter (J 36660-A) to turn the bolt another 76 degrees. To conclude reinstall the right front tire followed by the wheel and Drive Belt then execute the ckp system variation learn procedure.

OEM 2002 Buick Park Avenue Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Harmonic Balancers found

View related parts
2002 Buick Park Avenue Crankshaft Balance
Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.7 x 6.5 x 2.4 inches
- Condition: New
- SKU: 12618249
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Vibration Damper
Part Number: 12563265
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24505177
- Item Weight: 14.30 Pounds
- Item Dimensions: 8.2 x 8.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12563265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Vibration Damper
Part Number: 12563266
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Item Weight: 13.10 Pounds
- Item Dimensions: 9.1 x 4.2 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12563266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2002 Buick Park Avenue Harmonic Balancer

With a comprehensive array of OEM 2002 Buick Park Avenue Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Park Avenue Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the harmonic balancer on 2002 Buick Park Avenue?
A: To change the crankshaft balancer start by taking off the Drive Belt together with the right front tire and wheel. Utilize the flywheel holding tool (J 37096) to stabilize the flywheel while you remove the balancer bolt using care to maintain the pulley attached to the balancer since they need treatment as a complete assembly. The crankshaft balancer remover (J 38197-A) should now be used to remove the crankshaft balancer through the installation of 1/4 inch bolts onto the pulley while tightening them to 1/4 inch depth. Inspection together with cleaning steps are mandatory before the crankshaft balancer mounts. The seal surface requires engine oil lubrication before installing the crankshaft balancer while you maintain your grip on the flywheel through use of the flywheel holding tool (J 37096). Screw the crankshaft balancer bolt up to 150 nm (111 ft. Lbs.), apply the torque angle meter (J 36660-A) to turn the bolt another 76 degrees. To conclude reinstall the right front tire followed by the wheel and Drive Belt then execute the ckp system variation learn procedure.