Make sure this part fits

GM 12563265
Vibration Damper

2000-2009 GM

Customer Questions & Expert Answers (16)
GM 12563265 Vibration Damper
  • Part Description
    Pulley; Harmonic Balancer Puller; Harmonic Balancer
  • Replaces
    24505177
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL6 Cyl 3.8 L GAS
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2008 Buick LucerneCX, CXL6 Cyl 3.8 L GAS
    2000-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2000-2005 Pontiac BonnevilleSE, SLE6 Cyl 3.8 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT26 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12563265 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12563265 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the torque specifications for the crankshaft balancer bolt for the 2007 Buick Lucerne? Posted by Customer
    A:
    Tighten the bolt to 150 N.m (111 lb ft) plus an additional 76 degrees with the torque angle meter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What tool is used to remove the crankshaft balancer for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Use the Harmonic Balancer Puller (J 41816-A) to remove the crankshaft balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2006 Buick Lucerne? Posted by Customer
    A:
    Remove the drive belt, wheel house liner, and torque converter covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2007 Buick LaCrosse? Posted by Customer
    A:
    First, remove the accessory drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the seal surface be prepared during installation for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Lubricate the seal surface with engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the torque specification for the crankshaft balancer bolt for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Tighten the crankshaft balancer bolt to 150 Nm (111 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done after removing the crankshaft balancer for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Install the new crankshaft balancer and reattach the accessory drive belt before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done after removing the accessory drive belt for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step in the process for the 2001 Buick LeSabre? Posted by Customer
    A:
    Remove the drive belt and the right front tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the torque specification for the new crankshaft balancer bolt for the 2008 Buick Lucerne? Posted by Customer
    A:
    Tighten the new crankshaft balancer bolt to 150 N.m (111 lb ft) plus an additional 76 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you remove the crankshaft balancer for the 2005 Buick LeSabre? Posted by Customer
    A:
    Utilize the Crankshaft Balancer Remover (J 38197-A) by attaching 1/4 inch bolts to the pulley and screwing them in 1/4 inch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What additional step is required after tightening the bolt for the 2000 Buick LeSabre? Posted by Customer
    A:
    Use the J 36660-A (Torque Angle Meter) to tighten it an additional 76 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2005 Buick Park Avenue? Posted by Customer
    A:
    First, remove the drive belt and the right front tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you hold the flywheel during the process for the 2004 Buick LeSabre? Posted by Customer
    A:
    Use the Flywheel Holding Tool (J 37096) to hold the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How is the crankshaft balancer installed for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Install the crankshaft balancer while using the Flywheel Holding Tool (J37096) to hold the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Vibration Damper 12563265 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12563265 Vibration Damper is available in the market under the name GM Harmonic Balancer. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12563265 Vibration Damper fits certain Buick LaCrosse, LeSabre, Lucerne models, as well as Pontiac Grand Prix, Bonneville models.
The original GM component designated by manufacturer part number 12563265 maintains top performance when functioning as the Pulley; Harmonic Balancer Puller; Harmonic Balancer unit. The component 12563265 is constructed from durable material and its dimensions span 8.2 x 8.2 x 5.3 inches while weighing 14.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer. The part 12563265 has available replacement options 24505177. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.