How to service and repair the rear motor and transmission mount on 2002 Buick Park Avenue?

To service and repair the rear transmission mount, lift and support vehicle, then remove power steering gear heat shield. At the Rack And Pinion separate the power steering pressure hose down and suspend it from the exhaust pipe and then down would be the power steering return hose. Hold up the transaxle using a transaxle support stand, then remove nuts from mount bracket, lower mounts' bolts, and nut. The next step is to remove the three retaining bolts of the mount bracket and get the mount and the mount bracket from the vehicle. For installation, mount up the mount and the mount bracket to the vehicle, applying thread lock compound gm p/n 12345493 or equivalent on the rear transmission bracket bolts. Fasten the retaining bolts to the mount bracket; tighten to an 63 nm (46 ft. Lbs.). Subsequently, the transmission mount lower bolts and nut are installed onto the mount, which is to be tightened at 50nm (37ft. Lbs.); followed the upper nuts are installed onto the mount and are to be tightened at 50nm (37ft. Lbs.), respectively. Take off the transaxle support stand then put the power steering return hose and power steering pressure hose to the Rack And Pinion; install the power steering gear heat shield and return the vehicle by lowering it.

OEM 2002 Buick Park Avenue Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Motor And Transmission Mounts found

View related parts
2002 Buick Park Avenue Transmission Mount, White, Rear
Part Number: 25723646
$70.40 MSRP: $110.27
You Save: $39.87 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Transmission Rear *White; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
- Position: Rear
- Replaces: 25693540, 25705524
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 8.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25723646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Transmission Mount
Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Transmission Mount, Driver Side
Part Number: 25695932
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Transmission Mount; Mount; Mount, Transmission Mounting
- Position: Driver Side
- Replaces: 25662258, 25691733, 25689177, 25713700
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 6.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25695932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Support
Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2002 Buick Park Avenue Rear Mount Bracket
Part Number: 25677169
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount; Rear Bracket; Bracket, Transmission Mounting Support
- Position: Rear
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.6 x 5.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25677169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2002 Buick Park Avenue Motor And Transmission Mount

With a comprehensive array of OEM 2002 Buick Park Avenue Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Park Avenue Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Park Avenue Parts Questions & Experts Answers

Q: How to service and repair the rear motor and transmission mount on 2002 Buick Park Avenue?
A: To service and repair the rear transmission mount, lift and support vehicle, then remove power steering gear heat shield. At the Rack And Pinion separate the power steering pressure hose down and suspend it from the exhaust pipe and then down would be the power steering return hose. Hold up the transaxle using a transaxle support stand, then remove nuts from mount bracket, lower mounts' bolts, and nut. The next step is to remove the three retaining bolts of the mount bracket and get the mount and the mount bracket from the vehicle. For installation, mount up the mount and the mount bracket to the vehicle, applying thread lock compound gm p/n 12345493 or equivalent on the rear transmission bracket bolts. Fasten the retaining bolts to the mount bracket; tighten to an 63 nm (46 ft. Lbs.). Subsequently, the transmission mount lower bolts and nut are installed onto the mount, which is to be tightened at 50nm (37ft. Lbs.); followed the upper nuts are installed onto the mount and are to be tightened at 50nm (37ft. Lbs.), respectively. Take off the transaxle support stand then put the power steering return hose and power steering pressure hose to the Rack And Pinion; install the power steering gear heat shield and return the vehicle by lowering it.