How to Inspect the Motor and Transmission Mount on 2003 Buick Park Avenue?

Begin transmission mount inspection by lifting the vehicle while placing a wooden block between the Oil Pan bottom and the jack support to stop damage. Check whether transmission/transaxle mount fluid is the actual source of loss before replacing it when you suspect it has leaked because leaking could also come from engine components and transmission/transaxle parts or accessories. Next, raise the transmission/transaxle to create slight tension in the mount and observe it for any of the following conditions: the mount displays issues such as heat check cracks on its hard rubber surface or rubber layer separation from metal plates or splits through its center region. Replace the transmission mount or transaxle when any of these damaging conditions occur. As part of replacement work execute the instructions found under automatic transmission mount replacement - front, left, rear and automatic transmission mount bracket replacement - front, left, and rear. Lower the transmission/transaxle system to tighten all mounting points between the metal plate of the mount and frame or bracket using bolts or nuts. Check Engine Mount inspection for relevant Engine Mount guidelines.

OEM 2003 Buick Park Avenue Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Motor And Transmission Mounts found

View related parts
2003 Buick Park Avenue Transmission Mount, White, Rear
Part Number: 25723646
$70.40 MSRP: $110.27
You Save: $39.87 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Transmission Rear *White; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
- Position: Rear
- Replaces: 25693540, 25705524
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 8.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25723646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Park Avenue Transmission Mount
Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Park Avenue Transmission Mount, Driver Side
Part Number: 25695932
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Transmission Mount; Mount; Mount, Transmission Mounting
- Position: Driver Side
- Replaces: 25662258, 25691733, 25689177, 25713700
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 6.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25695932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Park Avenue Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Park Avenue Support
Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Park Avenue Rear Mount Bracket
Part Number: 25677169
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount; Rear Bracket; Bracket, Transmission Mounting Support
- Position: Rear
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.6 x 5.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25677169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2003 Buick Park Avenue Motor And Transmission Mount

With a comprehensive array of OEM 2003 Buick Park Avenue Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Park Avenue Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Park Avenue Parts Questions & Experts Answers

Q: How to Inspect the Motor and Transmission Mount on 2003 Buick Park Avenue?
A: Begin transmission mount inspection by lifting the vehicle while placing a wooden block between the Oil Pan bottom and the jack support to stop damage. Check whether transmission/transaxle mount fluid is the actual source of loss before replacing it when you suspect it has leaked because leaking could also come from engine components and transmission/transaxle parts or accessories. Next, raise the transmission/transaxle to create slight tension in the mount and observe it for any of the following conditions: the mount displays issues such as heat check cracks on its hard rubber surface or rubber layer separation from metal plates or splits through its center region. Replace the transmission mount or transaxle when any of these damaging conditions occur. As part of replacement work execute the instructions found under automatic transmission mount replacement - front, left, rear and automatic transmission mount bracket replacement - front, left, and rear. Lower the transmission/transaxle system to tighten all mounting points between the metal plate of the mount and frame or bracket using bolts or nuts. Check Engine Mount inspection for relevant Engine Mount guidelines.