Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Front Bracket; Bracket
Position: Front
Item Weight: 3.60 Pounds
Item Dimensions: 13.7 x 9.8 x 5.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25638467
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Cadillac DeVille Submodels:
Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
2001 Cadillac DeVille Engine Mount
With a comprehensive array of OEM 2001 Cadillac DeVille Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac DeVille Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Cadillac DeVille Parts Questions & Experts Answers
Q: How to replace the right engine mount on 2001 Cadillac DeVille?
A: Right engine mount replacement requires vehicle elevation together with a wheel removal before continuing with the repair process. Locate a suitable jack below the engine assembly while you detach the engine mount nut which fastens to the engine mount bracket. The procedure starts with reducing the jack height to let the engine descend and continuing by removing the right engine mount's bolt and nut that attach it to the frame rail while also dislodging the two nuts securing the mount to the rail. Finally you can remove the right engine mount. Caretakers must detach the right engine mount from its current position. The right engine mount installation requires placing it against the frame rail while setting bolt and nut into the frame rail. Additionally, follow the Fastener Notice in Service Precautions. To finish installation of the right engine mount to the body rail you should tighten the right engine mount to body rail nuts (3, 4) to 70 Nm (52 ft. lbs.). First position the engine correctly and then attach the right engine mount to the right engine mount bracket while torquing it to 80 Nm (59 ft. lbs.). After taking out the engine support jack, users must install the right front wheel while lowering the entire vehicle to completion.