Other Name: Bracket, Transmission Mounting Support; Engine Mount Bracket; Motor Mount; Rear Mount Bracket; Rear Bracket
Position: Rear
Item Weight: 4.00 Pounds
Item Dimensions: 6.1 x 7.2 x 4.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25691448
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Cadillac DeVille Submodels:
Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
2001 Cadillac DeVille Motor And Transmission Mount
With a comprehensive array of OEM 2001 Cadillac DeVille Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac DeVille Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Cadillac DeVille Motor And Transmission Mount Parts and Q&A
Q: How to replace the rear Motor and Transmission Mount on 2001 Cadillac DeVille?
A: You should first lift and support the vehicle, then use a suitable jack to hold up the engine assembly. Unscrew the mount nuts from the bracket, and then use the jack to lift the engine off the subframe a little. After that, take out the bolts that hold the mount to the frame, and then take out the single nut that connects the mount to the frame, and afterward remove the mount . Put the mount in place, then put in the bolts and nut and tighten them to 70 Nm (52 ft. lbs.). Put the transmission into place and fasten the nut between the mount and mount bracket, make sure it is tightened to 75 Nm (55 ft. lbs.). When you are done, take away the engine assembly support jack and lower the vehicle.