How to replace the rear automatic motor and transmission mount on 2000 Cadillac Seville?

Firstly, lift and support the vehicle, and then support the unit of the engine with a suitable jack, while lifting the rear part of the automatic transmission mount for replacement. Take out the nuts securing the transmission mount to the transmission mount bracket, and lift the jack a little bit for lifting the engine assembly from the subframe up. Then undo the bolts and the 1 nut that hold the mount on to the frame, and pull the mount out, Installation commences with installation of the mount followed by mount attaching bolt, and nut to the frame with following the Fastener Notice from Service pre-cautions. Mount the fasteners to the frame followed by the secure mounting of the fasteners to the frame with the 2 nuts and tightening them 70 Nm (52 ft. lbs.). Lower into position and put nut onto the mount and mount bracket, tighten mount nut to 75 Nm (55 ft. lbs.). Finally, remove the engine assembly support jack and lift the vehicle down.

OEM 2000 Cadillac Seville Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Motor And Transmission Mounts found

View related parts
2000 Cadillac Seville Transmission Mount, Driver Side
Part Number: 25695932
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Transmission Mount; Mount; Mount, Transmission Mounting
- Position: Driver Side
- Replaces: 25662258, 25691733, 25689177, 25713700
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 6.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25695932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Motor Mount
Part Number: 25696073
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Front Mount; Mount; Engine Mount
- Position: Front
- Replaces: 25638466, 25684399
- Item Weight: 5.40 Pounds
- Item Dimensions: 8.2 x 5.1 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25696073
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Motor Mount, Passenger Side
Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Transmission Mount
Part Number: 25696037
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount
- Position: Rear
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.2 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25696037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Mount Bracket
Part Number: 25691448
Product Specifications
- Other Name: Bracket, Transmission Mounting Support; Engine Mount Bracket; Motor Mount; Rear Mount Bracket; Rear Bracket
- Position: Rear
- Item Weight: 4.00 Pounds
- Item Dimensions: 6.1 x 7.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25691448
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2000 Cadillac Seville Motor And Transmission Mount

With a comprehensive array of OEM 2000 Cadillac Seville Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Seville Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the rear automatic motor and transmission mount on 2000 Cadillac Seville?
A: Firstly, lift and support the vehicle, and then support the unit of the engine with a suitable jack, while lifting the rear part of the automatic transmission mount for replacement. Take out the nuts securing the transmission mount to the transmission mount bracket, and lift the jack a little bit for lifting the engine assembly from the subframe up. Then undo the bolts and the 1 nut that hold the mount on to the frame, and pull the mount out, Installation commences with installation of the mount followed by mount attaching bolt, and nut to the frame with following the Fastener Notice from Service pre-cautions. Mount the fasteners to the frame followed by the secure mounting of the fasteners to the frame with the 2 nuts and tightening them 70 Nm (52 ft. lbs.). Lower into position and put nut onto the mount and mount bracket, tighten mount nut to 75 Nm (55 ft. lbs.). Finally, remove the engine assembly support jack and lift the vehicle down.