How to replace the right engine mount bracket on Buick LeSabre?

The first step to replace the right Engine Mount Bracket includes vehicle elevation and support. Begin by taking off the right front fascia extension followed by using a suitable jack for supporting the engine assembly. Proceed by removing the nut that holds the right Engine Mount to the right Engine Mount Bracket before lowering the jack for the engine to descend. Start by taking out the three fasteners that hold the right Engine Mount Bracket to the engine structure before removing its bracket stud and bracket. The right Engine Mount Bracket should be placed on the front Engine Mount stud and engine after applying thread lock compound gm p/n 12345493 (Canadian P/N 10953488) to the right Engine Mount Bracket bolts. First install the lower right Engine Mount Bracket bolts in a loose manner before applying thread lock compound to the right Engine Mount Bracket stud which must be tightened to 8 nm (71 inch lbs.). You should install the right Engine Mount Bracket nut to the engine before tightening right Engine Mount Bracket fasteners to 60 nm (44 ft. Lbs.). Secure the right Engine Mount to the right Engine Mount Bracket through installation of the mounting nut so that torque reaches 80 nm (59 ft. Lbs.). The procedure ends by removing the engine support jack while you reinstall the right front fascia extension and then lower the vehicle.

OEM Buick LeSabre Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Engine Mount Brackets found

View related parts
Buick LeSabre Transmission Mount Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Support Reinforcement Part Number: 20742236
$13.11 MSRP: $18.75
You Save: $5.64 (31%)
ADD TO CART
Product Specifications
- Other Name: Reinforcement Assembly; Reinforcement; Reinforcement, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Motor Mount Part Number: 14038194
$13.11 MSRP: $23.71
You Save: $10.60 (45%)
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mount Dampening
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986 Buick LeSabre | Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Motor Mount, Passenger Side Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Motor Mount Part Number: 22146628
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Front Mount; Mount; Mount, Engine Mount Dampening
- Replaces: 22145817, 22185818
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Support Part Number: 14031503
Product Specifications
- Other Name: Support, Transmission Mounting; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick LeSabre Mount Bracket, Driver Side Part Number: 559272
Product Specifications
- Other Name: Bracket-Engine Mount Frame; Engine Mount Bracket; Motor Mount Bracket; Bracket, Engine Mounting
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 559271
Product Specifications
- Other Name: Bracket-Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick LeSabre Support Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 25685989
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Replaces: 22145826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Engine Bracket, Driver Side Part Number: 25620949
Product Specifications
- Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
- Position: Driver Side
- Replaces: 25623908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Support Reinforcement Part Number: 25606479
Product Specifications
- Other Name: Reinforcement, Engine Mounting; Reinforcement
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 25531252
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Coil Mount Bracket; Compressor Bracket; Compressor Mount Bracket; Bracket, A/C Compressor Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988, 1986 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Motor Mount Part Number: 22188804
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 17996417, 17996207, 17989546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 22145664
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 22112242
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Engine Bracket, Passenger Side Part Number: 20416932
Product Specifications
- Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Mount Bracket Part Number: 1262679
Product Specifications
- Other Name: Bracket, Engine Mount; Engine Mount Bracket; Motor Mount; Engine Bracket; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Engine Mount Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Engine Mount Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

As a principal element the Buick Lesabre Engine Mount Bracket represents reliability and peak performance throughout the entire Buick Lesabre model range. Through its design features the Engine Mount Bracket controls engine noise and vibrations and does so securely to hold both the engine block and transaxle leading to enhanced comfort and safety during driving. Different generations of Buick Lesabre dating from 1959 through 2005 can utilize this Engine Mount Bracket which combines premium engineering advances that extend from basic rubber strains to state-of-the-art hydraulic and electronic active mounts that adapt their firmness to engine speed needs. The Buick Lesabre Engine Mount Bracket stands out in the automotive market because its adaptable design leads to better performance alongside efficient operation. Through time the Buick Lesabre established its long-lasting nature and the Engine Mount Bracket functions as an important element that stops problems caused by worn-out mounts such as sponginess or separation. StabiliTrak along with RainSense wipers served to enhance the later Buick Lesabre models through increased safety performance and design point. The car Engine Mount Bracket demonstrates lasting usefulness by supporting the vehicle design to deliver smooth engine operation which produces an enhanced driving experience for the automaker model enthusiasts.

Buick LeSabre Engine Mount Bracket Parts and Q&A

Transmission Mount
25736430
Q: How to replace the right engine mount bracket on Buick LeSabre?
A:
The first step to replace the right Engine Mount Bracket includes vehicle elevation and support. Begin by taking off the right front fascia extension followed by using a suitable jack for supporting the engine assembly. Proceed by removing the nut that holds the right Engine Mount to the right Engine Mount Bracket before lowering the jack for the engine to descend. Start by taking out the three fasteners that hold the right Engine Mount Bracket to the engine structure before removing its bracket stud and bracket. The right Engine Mount Bracket should be placed on the front Engine Mount stud and engine after applying thread lock compound gm p/n 12345493 (Canadian P/N 10953488) to the right Engine Mount Bracket bolts. First install the lower right Engine Mount Bracket bolts in a loose manner before applying thread lock compound to the right Engine Mount Bracket stud which must be tightened to 8 nm (71 inch lbs.). You should install the right Engine Mount Bracket nut to the engine before tightening right Engine Mount Bracket fasteners to 60 nm (44 ft. Lbs.). Secure the right Engine Mount to the right Engine Mount Bracket through installation of the mounting nut so that torque reaches 80 nm (59 ft. Lbs.). The procedure ends by removing the engine support jack while you reinstall the right front fascia extension and then lower the vehicle.