How to replace the right engine mount bracket on 2004 Buick LeSabre?

Question

Accepted Answer

The correct procedure to replace the right Engine Mount Bracket starts with elevating and supporting the vehicle. The right front fascia extension needs removal followed by suitable engine assembly suspension using a jack. Once you remove the right Engine Mount nut from its bracket you can allow the engine to move downward through slight reduction of the jack height. Initial steps involve removing three fasteners from the right Engine Mount Bracket that attaches to the engine and subsequent elimination of the right Engine Mount Bracket stud and bracket itself. You should install the right Engine Mount Bracket by positioning it on the front Engine Mount stud and engine and apply thread lock compound gm p/n 12345493 or equivalent to the right Engine Mount Bracket bolts. The installer should install the two lower right Engine Mount Bracket bolts loosely before applying thread lock gm p/n 12345493 or equivalent to the right Engine Mount Bracket stud. You should install the right Engine Mount Bracket stud to the engine before tightening it to 8 nm (71 inch lbs.). Set the right Engine Mount Bracket nut on the engine before fastening the right Engine Mount brackets at 60 nm (44 ft. Lbs.). The right Engine Mount Bracket requires installation of its nut joined to the right Engine Mount Bracket. Torque this fastener to 80 nm (59 ft. Lbs.). As the final step place the engine support jack into storage while installing the right front fascia extension and lowering the vehicle.

OEM 2004 Buick LeSabre Engine Mount Bracket

3 Engine Mount Brackets found

2004 Buick LeSabre Transmission Mount Part Number: 25736430

2004 Buick LeSabre Motor Mount, Passenger Side Part Number: 25710672

2004 Buick LeSabre Support Part Number: 25740662

2004 Buick LeSabre Engine Mount Bracket

2004 Buick LeSabre Engine Mount Bracket Parts and Q&A

Related 2004 Buick LeSabre Parts

Alternate Year Models