How to replace the coil springs on a front-wheel-drive with an axle on 2002 Buick Rendezvous?

In order to use axle and replace the Coil Springs on a front wheel drive vehicle, raise and support the vehicle using a utility stand to hold the rear axle in the middle. I will remove the Shock Absorber lower bolts and nuts and then disconnect the rear axle Tie Rod from the rear axle and ensure that there is no hanging of the rear axle through the brake hoses, because they may suffer damage in this manner. Lower the rear axle using the utility stand whereas taking care in removing the springs and insulators empirically in an excess so as to ensure that they are not damaged as there might occur cases of chipping the coating which may cause early failure. For installation offset the new springs so that the paint stripe is facing rearward and centered to the Shock Absorber, insert the springs and insulators onto the rear axle. Use the utility stand to raise the rear axle, reinstall rear axle Tie Rod, install shock absorbers. Finally, take away the utility stand and lower the vehicle.

OEM 2002 Buick Rendezvous Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coil Springs found

View related parts
2002 Buick Rendezvous Coil Spring
Part Number: 89060183
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22196695
- Item Weight: 8.90 Pounds
- Item Dimensions: 15.2 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89060183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2002 Buick Rendezvous Coil Spring, Rear
Part Number: 10412899
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring, Rear
- Position: Rear
- Item Weight: 6.60 Pounds
- Item Dimensions: 14.3 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10412899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2002 Buick Rendezvous Spring, Rear
Part Number: 10412896
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 7.80 Pounds
- Item Dimensions: 15.1 x 9.0 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10412896
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2002 Buick Rendezvous Coil Springs

With a comprehensive array of OEM 2002 Buick Rendezvous Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Rendezvous Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Rendezvous Coil Springs Parts Questions & Experts Answers

Q: How to replace the coil springs on a front-wheel-drive with an axle on 2002 Buick Rendezvous?
A: In order to use axle and replace the Coil Springs on a front wheel drive vehicle, raise and support the vehicle using a utility stand to hold the rear axle in the middle. I will remove the Shock Absorber lower bolts and nuts and then disconnect the rear axle Tie Rod from the rear axle and ensure that there is no hanging of the rear axle through the brake hoses, because they may suffer damage in this manner. Lower the rear axle using the utility stand whereas taking care in removing the springs and insulators empirically in an excess so as to ensure that they are not damaged as there might occur cases of chipping the coating which may cause early failure. For installation offset the new springs so that the paint stripe is facing rearward and centered to the Shock Absorber, insert the springs and insulators onto the rear axle. Use the utility stand to raise the rear axle, reinstall rear axle Tie Rod, install shock absorbers. Finally, take away the utility stand and lower the vehicle.