OEM 2002 Buick Rendezvous Fuse Box

2002 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the console fuse box on 2002 Buick Rendezvous?

  A: The process to change either the console electrical center or junction block begins by disconnecting the negative Battery Cable followed by removing the front floor console. First disconnect the Body Control Module (BCM) electrical connectors numbered (1, 2, 3) as well as the console accessory wiring junction block electrical connectors identified as (1, 2). Unclip the holders which secure the console accessory wiring junction block before taking it away from the bracket. Reposition the bcm once its replacement process completes. After placing the console accessory wiring junction block inside the bracket you must secure its retainers. Connect both electrical connectors (1, 2) on the console accessory wiring junction block while tightening bolts (1, 2) to finger tightness until it seats before torquing them to 6 n.m (54 lb in). Installation of the front floor console follows bcm electrical connector (1, 2, 3) reconnection before reconnecting the negative Battery Cable.