How to replace the emblem/nameplate on the pickup cab on 2002 Cadillac Escalade?

Apply tape to protect the pickup cab area before you heat the existing emblem. Then use the plastic tool to remove it. Place the heat gun J25070 at a distance of 152 mm or 6.0 inches from the emblem/nameplate surface to warm it for 30 seconds while moving in circular motions. Use a specific plastic tool to carefully remove the emblem/nameplate from the pickup cab panel surface. Then clean the front and back of the emblem/nameplate using a 3M scotch brite molding adhesive remover disk according to the instructions on the package or an equivalent method. Apply varnish making and painting naptha to clean the pickup cab panel area. Place tape to the specified dimensions if the emblem/nameplate location has no defined spot. Heat the pickup cabin surface using the gun to reach 21°C (70°F) but never touch the emblem adhesive pads during this process. Set the emblem/nameplate on the pickup panel with the front side while taking off its backing material. Press the emblem/nameplate throughout its surface to help bonding happen and check for good adherence before removing tape from the area around it.

OEM 2002 Cadillac Escalade Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Emblems found

View related parts
2002 Cadillac Escalade Nameplate, Front Part Number: 15162148
$92.64 MSRP: $137.88
You Save: $45.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Front Side Door Name; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Emblem, End Gate And Rear Door
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.4 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15162148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2002 Cadillac Escalade Nameplate, Outer Part Number: 15074732
$7.44 MSRP: $11.07
You Save: $3.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, End Gate And Rear Door Decoration
- Position: Outer
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.5 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15074732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Front Part Number: 25759438
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 88944263
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.0 x 3.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25759438
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Front Part Number: 25759437
$61.13 MSRP: $90.98
You Save: $29.85 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 88944248
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.8 x 6.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25759437
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Black, Rear Part Number: 15067259
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.6 x 8.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15067259
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Rear Part Number: 15074076
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.2 x 8.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15074076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, White Part Number: 15067261
Product Specifications
- Other Name: Emblem Assembly-Lift Gate *Pewter; Emblem, End Gate And Rear Door Decoration
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.3 x 8.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15067261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Red Part Number: 15067260
Product Specifications
- Other Name: Emblem Assembly-Lift Gate *Redfire; Emblem, End Gate And Rear Door Decoration
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.0 x 9.3 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15067260
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem, Beige, Rear Part Number: 15066599
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.9 x 9.9 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15066599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem Part Number: 88944262
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Replaces: 88892820
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.0 x 3.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88944262
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2002 Cadillac Escalade Emblem Part Number: 88943423
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.1 x 6.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88943423
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2002 Cadillac Escalade Emblem

With a comprehensive array of OEM 2002 Cadillac Escalade Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac Escalade Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac Escalade Emblem Parts and Q&A

Q: How to replace the emblem/nameplate on the pickup cab on 2002 Cadillac Escalade?
A: Apply tape to protect the pickup cab area before you heat the existing emblem. Then use the plastic tool to remove it. Place the heat gun J25070 at a distance of 152 mm or 6.0 inches from the emblem/nameplate surface to warm it for 30 seconds while moving in circular motions. Use a specific plastic tool to carefully remove the emblem/nameplate from the pickup cab panel surface. Then clean the front and back of the emblem/nameplate using a 3M scotch brite molding adhesive remover disk according to the instructions on the package or an equivalent method. Apply varnish making and painting naptha to clean the pickup cab panel area. Place tape to the specified dimensions if the emblem/nameplate location has no defined spot. Heat the pickup cabin surface using the gun to reach 21°C (70°F) but never touch the emblem adhesive pads during this process. Set the emblem/nameplate on the pickup panel with the front side while taking off its backing material. Press the emblem/nameplate throughout its surface to help bonding happen and check for good adherence before removing tape from the area around it.