OEM 2002 Cadillac Seville Parking Brake Cable

2002 Cadillac Seville Parking Brake Cable Parts Questions & Experts Answers

• Q: How to replace the left rear parking brake cable on 2002 Cadillac Seville?

  A: A secure vehicle support system must be installed after vehicle elevation before starting the left rear parking brake cable replacement. Detach the left rear tire together with the wheel assembly. Users should disconnect the intermediate park brake cable from the park brake cable connector by pulling down on its connector near the connection point. The task begins by removing the left rear park brake cable from contact with the rear equalizer. Through utilization of the Parking Brake Cable Release Tool (J 37043) it becomes possible to trigger the retaining tabs on the left park brake cable housing which enables extraction of the left park brake cable from its position on the rear support mounting bracket. The left park brake cable requires use of the Parking Brake Cable Release Tool (J 37043) to release its retainer tabs on both removals before disconnecting it from the park brake caliper cable bracket. During installation involve pushing the left park brake cable into the park brake caliper cable bracket while checking that locking tabs have their correct position. Use the left park brake cable to join the park brake lever on the caliper before inserting it into the rear support mounting bracket where the locking tabs must sit properly. The left park brake cable must connect to the equalizer whereas the intermediate park brake cable needs to link to the park brake cable connector. Place the left rear tire and wheel unit on the vehicle and lower it to its suitable position.