Other Name: Sealing Strip, Windshield; Seal Strip; Windshield Seal Strip
Position: Lower
Item Weight: 0.50 Pounds
Item Dimensions: 8.6 x 9.3 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10132029
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
2002 Chevrolet Camaro Weather Strip
With a comprehensive array of OEM 2002 Chevrolet Camaro Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Camaro Weather Strip Parts Questions & Experts Answers
Q: How to replace the Weather Strip on the lift-off panel on 2002 Chevrolet Camaro?
A: Start the replacement process of the lift-off panel weather strip by removing the roof lift-off window then laying it on a clean cloth to protect the glass surface. Begin handle detachment through the application of a small flat-blade screwdriver for handle spring removal. Open the trim cover by removing all its bolts/screws before you remove the cover from its place. Remove the weather strip bolts/screws (6, 9) and pull out the weather strip from its weather strip retainer . You should first eliminate the weather strip retaining bolts/screws before removing the retaining piece of weather strip. Install the weather strip retainer using the Fastener Notice in Service Precautions and secure it with bolts/screws at 1.7 N.m (15 lb in). Secure the weather strip to its weather strip retainer by using the installed bolts/screws and tightening them to 1.3 N.m (12 lb in). First attach the trim cover after you install the bolts or screws which must tighten to 1.7 N.m at a force of 15 lb in. Install the handle onto the shaft while it remains in an open position and put it in place using the handle spring before reinstalling the roof lift-off window.