OEM 2002 Chevrolet Cavalier Parking Brake Cable

2002 Chevrolet Cavalier Parking Brake Cable Parts Questions & Experts Answers

• Q: How to replace the right rear parking brake cable on 2002 Chevrolet Cavalier?

  A: The first step to replace the right rear Parking Brake Cable requires users to elevate and maintain their vehicle. Adjust the connector tang to enable cable extraction after which you can stretch the cable towards the back of the vehicle. Pull the cable one by one from the connector and then from the axle bracket . Common procedure requires you to first remove the tire and wheel setup before taking away the Brake Drum. Many vehicle repair professionals use a screwdriver to slide the tool between the Brake Shoe and the lower region of the rear park brake lever before removing the cable eyelet fitting from the lever. Proceed by removing both the conduit fitting and the backing plate retaining tabs which should be activated with light pressure. Start by mounting the conduit fitting into the backing plate followed by securing the Parking Brake Cable at the parking brake lever. The Brake Drum must be installed together with the tire along with the wheel assembly. Seam the cable to the axle bracket before connecting the right rear cable to the connector while readjusting the tang on the connector to anchor the cable. Adjust the brake system by lowering the vehicle during the process of fully applying and releasing the hand brake four to six times.