How to replace the steering knuckle on 2002 Chevrolet Impala?

The vehicle must be properly supported then raised before starting the Steering Knuckle replacement. Separate the bearing/hub assembly before extracting both components of front lower control arm ball stud and outer Tie Rod End from the Steering Knuckle. Scribe the strut to the knuckle prior to removing the bolts and nuts which connect the strut to the knuckle after which remove the knuckle from the vehicle. During installation put the knuckle back onto the vehicle and carefully tighten the bolts which connect the strut to the knuckle to 122 nm (90 ft. Lbs.). Put the outer tie rod into the Steering Knuckle followed by attaching the front lower control arm ball stud to the knuckle while adding the front wheel drive shaft bearing. Lower the vehicle then check the wheel alignment and make adjustments when needed.

OEM 2002 Chevrolet Impala Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
2002 Chevrolet Impala Knuckle, Driver Side Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Impala Knuckle, Driver Side Part Number: 23130696
$388.19 MSRP: $639.48
You Save: $251.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Driver Side
- Replaces: 19151396, 18022046, 25816705, 18060616
- Item Weight: 4.50 Pounds
- Item Dimensions: 13.4 x 11.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Impala Knuckle, Passenger Side Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Impala Knuckle, Passenger Side Part Number: 23130695
$433.92 MSRP: $623.98
You Save: $190.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Passenger Side
- Replaces: 19151397, 18022047, 18060617, 25816704
- Item Weight: 4.10 Pounds
- Item Dimensions: 14.0 x 10.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Impala Knuckle, Driver Side Part Number: 25816686
$19.97 MSRP: $32.89
You Save: $12.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 18023734, 18061054
- Item Weight: 10.90 Pounds
- Item Dimensions: 11.4 x 9.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816686
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2002 Chevrolet Impala Knuckle, Passenger Side Part Number: 25816685
$146.70 MSRP: $240.12
You Save: $93.42 (39%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18023735, 18061055
- Item Weight: 10.50 Pounds
- Item Dimensions: 14.8 x 10.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2002 Chevrolet Impala Steering Knuckle

With a comprehensive array of OEM 2002 Chevrolet Impala Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Impala Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Impala Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on 2002 Chevrolet Impala?
A: The vehicle must be properly supported then raised before starting the Steering Knuckle replacement. Separate the bearing/hub assembly before extracting both components of front lower control arm ball stud and outer Tie Rod End from the Steering Knuckle. Scribe the strut to the knuckle prior to removing the bolts and nuts which connect the strut to the knuckle after which remove the knuckle from the vehicle. During installation put the knuckle back onto the vehicle and carefully tighten the bolts which connect the strut to the knuckle to 122 nm (90 ft. Lbs.). Put the outer tie rod into the Steering Knuckle followed by attaching the front lower control arm ball stud to the knuckle while adding the front wheel drive shaft bearing. Lower the vehicle then check the wheel alignment and make adjustments when needed.