OEM 2002 Chevrolet Malibu Shock Absorber

2002 Chevrolet Malibu Shock Absorber Parts Questions & Experts Answers

• Q: How to replace the front shock absorber on 2002 Chevrolet Malibu?

  A: A vehicle service starts by raising and supporting the vehicle before removing the tire and wheel assembly. Mark the strut's position on the knuckle and unfasten the strut mount to body securing nut that is hidden in the trunk compartment. Move to the next step of removal by taking out the fender well strut bolts before removing the strut knuckle bolts along with nuts from the strut. Take the strut out of the vehicle. During installation place the strut into position inside the vehicle before using loose bolting to install all knuckle bolts and nuts while properly aligning the marked positions. Drive the strut to body bolts into the fender well until they reach 25 Nm (18 ft. lbs.) torque before securing the strut to knuckle bolts with 120 Nm (89 ft. lbs.). Return the tire along with wheel assembly before lowering the vehicle. Complete the installation with strut to body nut tightening in the trunk to 25 Nm (18 ft. lbs.). You must perform an alignment test after completing these steps.