How to service the knock sensor on 2003 Buick Rendezvous?

Before initiating any service work on the knock sensor begin by turning the ignition OFF and raising the vehicle. First disconnect the wiring harness connector from the knock sensor before removing it from the engine block. When installing the knock sensor users must position it inside the engine block and avoid applying thread sealant to sensor threads since factory coatings help detect detonations adequately. The knock sensor installation requires torque application at 19 N.m (14 lb ft) followed by harness connector attachment to the sensor until vehicle descent is completed.

OEM 2003 Buick Rendezvous Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2003 Buick Rendezvous Knock Sensor
Part Number: 10456238
$19.36 MSRP: $60.45
You Save: $41.09 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

2003 Buick Rendezvous Knock Sensor

With a comprehensive array of OEM 2003 Buick Rendezvous Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Rendezvous Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Rendezvous Parts Questions & Experts Answers

Q: How to service the knock sensor on 2003 Buick Rendezvous?
A: Before initiating any service work on the knock sensor begin by turning the ignition OFF and raising the vehicle. First disconnect the wiring harness connector from the knock sensor before removing it from the engine block. When installing the knock sensor users must position it inside the engine block and avoid applying thread sealant to sensor threads since factory coatings help detect detonations adequately. The knock sensor installation requires torque application at 19 N.m (14 lb ft) followed by harness connector attachment to the sensor until vehicle descent is completed.

Related 2003 Buick Rendezvous Parts

Alternate Year Models

2002 Buick Rendezvous Knock Sensor 2004 Buick Rendezvous Knock Sensor