OEM 2003 Buick Rendezvous Crankshaft Position Sensor

2003 Buick Rendezvous Crankshaft Position Sensor Parts and Q&A

• Q: How to replace the Crankshaft Position Sensor (7X) on 2003 Buick Rendezvous?

  A: Start by turning off the ignition before elevating the vehicle when replacing the crankshaft position (CKP) sensor (7X). Begin by removing the right front tire and wheel from front-wheel drive vehicles. All-wheel-drive vehicle owners must disconnect the Catalytic Converter away from the Exhaust Manifold before repositioning it. First disconnect the sensor's electrical connector before you eliminate the mounting bolt or screw allowing removal of the sensor from the engine. When you keep the sensor for future use please check if there are any signs of wear or cracks and leakage. Before putting in the new sensor to the block, replace the damaged o-ring and lubricate it with engine oil. Install the sensor using the attaching bolt and secure it into place by tightening to 11 n.m (97 lb in). Afterward, return the electrical cable connector. Replace all components which were removed during the repair process - front-wheel-drive vehicles need their right wheel and tire reinstalled while all-wheel-drive vehicles should have their Catalytic Converter put back. Lower the vehicle before finishing with the ckp system variation learn procedure.