OEM 2003 Cadillac Seville Brake Caliper Bracket

2003 Cadillac Seville Brake Caliper Bracket Parts and Q&A

• Q: How to replace the front brake caliper bracket on 2003 Cadillac Seville?

  A: While performing your task of replacing the front Brake Caliper Bracket, first support the brake caliper using heavy mechanic's wire without any disconnection of the hydraulic brake flexible hose. Remove the brake pads and Brake Pad retainers from the Brake Caliper Bracket , after which remove Brake Caliper Bracket bolts and Brake Caliper Bracket with a Brake Caliper Bracket sir. Clear away any debris or rust from the Brake Caliper Bracket and check it and the brake mounting and hardware for cracks or damage, and if necessary, replace the bracket. Before installation. Make certain aperture bracket bolts and threaded holes are blank on the thread locker and debris with the help of denatured alcohol or equal one. In the case of the reuse of old caliper bracket bolts, apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) across two-thirds of the length of the threads, make sure there are no voids, and wait approximately ten minutes to cure. Mount Brake Caliper Bracket to Steering Knuckle and fasten it with the Brake Caliper Bracket bolts tightened to 185 nm (137 ft. Lbs.). Apply a thin layer of niglube(R) grease to lubricate the brake caliper pin bolts, thereafter install your Brake Pad retainers and brake pads to the Brake Caliper Bracket before finally installing your brake caliper.