How to replace the shock absorber in the front suspension on 2003 Chevrolet Cavalier?

The replacement of front suspension strut assemblies starts with unfastening both the body-attaching bolt along with the attached nuts securing the strut assembly top. Place two jackstands below the lower Control Arm after vehicle support and lifting. Next lower the vehicle weight until it rests on the jack stands and lower control arms. After wheel removal make the necessary scribe marks on the strut flange and break loose then remove the bolts and nuts which secure the strut to the Steering Knuckle before removing the strut assembly from the vehicle. The installer should place the strut assembly back into position then use the bolts and nuts to connect between the Steering Knuckle and tightening torque to 180 n.m (133 lb ft). The installer needs to lower the vehicle before installing the top strut-to-body attaching nuts and bolt. They should tighten these fasteners to 25 n.m (18 lb ft). Inspection of front wheel alignment must follow tire and wheel assembly installation.

OEM 2003 Chevrolet Cavalier Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2003 Chevrolet Cavalier Strut, Rear Part Number: 22400332
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber
- Position: Rear
- Item Weight: 5.80 Pounds
- Item Dimensions: 24.8 x 7.1 x 6.0 inches
- Condition: New
- Require Quantity: 2
- SKU: 22400332
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Chevrolet Cavalier Strut, Front Part Number: 22064776
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 22064572, 22064704
- Item Weight: 12.10 Pounds
- Item Dimensions: 19.3 x 10.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22064776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Chevrolet Cavalier Shock Absorber, Rear Part Number: 22064573
Product Specifications
- Other Name: Absorber, Rear Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Strut; Strut, Front And Rear Suspension
- Position: Rear
- Item Weight: 7.40 Pounds
- Item Dimensions: 23.5 x 6.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22064573
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2003 Chevrolet Cavalier Shock Absorber

With a comprehensive array of OEM 2003 Chevrolet Cavalier Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Cavalier Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Cavalier Shock Absorber Parts and Q&A

Q: How to replace the shock absorber in the front suspension on 2003 Chevrolet Cavalier?
A: The replacement of front suspension strut assemblies starts with unfastening both the body-attaching bolt along with the attached nuts securing the strut assembly top. Place two jackstands below the lower Control Arm after vehicle support and lifting. Next lower the vehicle weight until it rests on the jack stands and lower control arms. After wheel removal make the necessary scribe marks on the strut flange and break loose then remove the bolts and nuts which secure the strut to the Steering Knuckle before removing the strut assembly from the vehicle. The installer should place the strut assembly back into position then use the bolts and nuts to connect between the Steering Knuckle and tightening torque to 180 n.m (133 lb ft). The installer needs to lower the vehicle before installing the top strut-to-body attaching nuts and bolt. They should tighten these fasteners to 25 n.m (18 lb ft). Inspection of front wheel alignment must follow tire and wheel assembly installation.