How to replace the axle shaft wheel seal on 2003 Chevrolet Cavalier?

Start by raising the vehicle and supporting it properly followed by taking out the front wheel assemblies and tire assemblies together with the wheel driveshaft. First extract the seal using j 23129 seal remover (J 23129) to check if the seal bore contains any nicks or burrs before cleaning it with fine grade sandpaper. Under installation protocols use the j 44335 differential bearing race and seal installer (J 44335) together with the j 7079-2 non-threaded driver handle (J 7079-2) to install the new seal while maintaining its position at the outer bore area. Dexron-iii transmission fluid saturn p/n 21019223 serves as the lubricant for the seal and then install the wheel driveshaft while referencing the front tire and wheel assemblies to lower the vehicle.

OEM 2003 Chevrolet Cavalier Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

View related parts
2003 Chevrolet Cavalier Dust Seal, Rear
Part Number: 26049394
$7.49 MSRP: $20.46
You Save: $12.97 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle; Power Steering Cylinder Boot Kit; Inner Tie Rod Cover; Tie Rod Seal; Outer Boot; Dust Shield; Grease Seal; Dust Cap; Assembly Seal; Lock Nut Seal.
- Position: Rear
- Replaces: 07828084, 7828084
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.4 x 2.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26049394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

2003 Chevrolet Cavalier Wheel Seal

With a comprehensive array of OEM 2003 Chevrolet Cavalier Wheel Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Cavalier Wheel Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Cavalier Parts Questions & Experts Answers

Q: How to replace the axle shaft wheel seal on 2003 Chevrolet Cavalier?
A: Start by raising the vehicle and supporting it properly followed by taking out the front wheel assemblies and tire assemblies together with the wheel driveshaft. First extract the seal using j 23129 seal remover (J 23129) to check if the seal bore contains any nicks or burrs before cleaning it with fine grade sandpaper. Under installation protocols use the j 44335 differential bearing race and seal installer (J 44335) together with the j 7079-2 non-threaded driver handle (J 7079-2) to install the new seal while maintaining its position at the outer bore area. Dexron-iii transmission fluid saturn p/n 21019223 serves as the lubricant for the seal and then install the wheel driveshaft while referencing the front tire and wheel assemblies to lower the vehicle.