How to replace the axle shaft wheel seal on 2002 Chevrolet Cavalier?

Vehicle servicing begins by properly supporting the vehicle while raising it then moving forward to remove front tires along with their assemblies and thirdly removing the wheel driveshaft. You should use the j 23129 seal remover (J 23129) together with the j 6125-b slide hammer (J 6125-B) to pull out the seal while inspecting the seal bore for any signs of nicks or burrs before cleaning it with fine grade sandpaper if needed. A new seal must be installed with j 44385 differential bearing race and seal installer (J 44385) and j 7079-2 non-threaded driver handle (J 7079-2) tools to achieve proper outer bore area seal placement. Utillize dexron iii transmission fluid to lubricate the seal followed by shaft drive wheel and front wheel installation before requiring vehicle drop.

OEM 2002 Chevrolet Cavalier Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

View related parts
2002 Chevrolet Cavalier Dust Seal, Rear Part Number: 26049394
Product Specifications
- Other Name: Seal, Rear Axle; Power Steering Cylinder Boot Kit; Inner Tie Rod Cover; Tie Rod Seal; Outer Boot; Dust Shield; Grease Seal; Dust Cap; Assembly Seal; Lock Nut Seal.
- Position: Rear
- Replaces: 07828084, 7828084
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.4 x 2.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26049394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

2002 Chevrolet Cavalier Wheel Seal

With a comprehensive array of OEM 2002 Chevrolet Cavalier Wheel Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Cavalier Wheel Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Cavalier Wheel Seal Parts and Q&A

Q: How to replace the axle shaft wheel seal on 2002 Chevrolet Cavalier?
A: Vehicle servicing begins by properly supporting the vehicle while raising it then moving forward to remove front tires along with their assemblies and thirdly removing the wheel driveshaft. You should use the j 23129 seal remover (J 23129) together with the j 6125-b slide hammer (J 6125-B) to pull out the seal while inspecting the seal bore for any signs of nicks or burrs before cleaning it with fine grade sandpaper if needed. A new seal must be installed with j 44385 differential bearing race and seal installer (J 44385) and j 7079-2 non-threaded driver handle (J 7079-2) tools to achieve proper outer bore area seal placement. Utillize dexron iii transmission fluid to lubricate the seal followed by shaft drive wheel and front wheel installation before requiring vehicle drop.