OEM 2001 Chevrolet Cavalier Wheel Seal

2001 Chevrolet Cavalier Parts Questions & Experts Answers

• Q: What Tools Are Required to Replace the Wheel Seal on the Automatic Transaxle-3T40 on 2001 Chevrolet Cavalier?

  A: The replacement process of the automatic transaxle-3t40 drive axle oil seal requires slide hammer (J6125-1F), axle seal remover (J23129), bushing installer/remover (J28537), left side axle seal installer (J34115), and driver handle (J8092) as essential tools. Initiate the process by removing the front fender liner and drive axle while maintaining the seal bore from damages. The axle seal remover (J23129) together with slide hammer (J6125-1B) should be used to remove the seals (117). Installation of new oil seals requires the left side axle seal installer (J34115) tool to place the seals while transmission oil should be used to lightly lubricate the seal lip. Guide the Axle Shaft through the lip seal as it passes by without letting the splines reach the lip surface to avoid damage. After installing the transmission case drive axle you should add the front fender liner and drop the vehicle. It is essential to avoid adding too much fluid since excess will cause foaming and fluid loss and result in shift complaints and likely generates damage to the components. End the procedure by dumping dexron iii oil to the specified level and checking the oil seal for signs of leakage.